Comparing Curt A Series and Q Series 5th Wheel Trailer Hitches

Question

Question:

What is the difference between the A series and Q series Curt 5th wheel hitches? They seem basically identical.

asked by: James B

0

Expert Reply:

The A series of Curt 5th wheel trailer hitches, such as # C16120, is the newest version and is replacing the Q series. The A series jaws overlap whereas the Q series butt up against each other more than overlap. And the bearing and shaft that the head pivots on is different between the 2. They do look very similar, in fact the specs and design are identical like you said, but you can think of the A series as the new and improved version of the Q series.

expert reply by: Michael H

0

Answer 1

The Curt A-Series line is the premium version over the Q-Series line and comes with a few differences. One major difference being the jaw design for the A-Series, which overlaps itself instead of just butting up to itself like the Q-Series does.…

view full answer...

Answer 2

We can help you out and it&#39;s definitely smart to check as there&#39;s a bunch of different options. I did verify with Air Lift the correct air bags for your &#39;02 F-350 4WD with Curt 5th wheel brackets, and they do use…

view full answer...

Answer 3

You&#39;re correct, you won&#39;t need the motorhome end of things since your motorhome has the Spartan Safe Haul system. You&#39;ll need the following parts which is the Air Force One Kit minus the parts that would typically…

view full answer...

Answer 4

You will not be able to use a lift kit since your axles are already under the springs. Your only option is to go with taller hangers. You will have to measure the height of your existing hangers and use the weblink I will be including below to find…

view full answer...

Answer 5

Yes, the Curt A20 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package part #C84FR will fit a 2020 Chevrolet Silverado 2500 with short bed. That said, you would just need to be mindful of your turning clearance between the cab of the vehicle…

view full answer...

Answer 6

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from…

view full answer...

Answer 7

To best combat chucking, between a MORryde and Rota-Flex pin box, the best option to replace your Lippert 1621 is the Rota-Flex, with the correct part number being the following: - Trailair Rota-Flex 5th Wheel Pin Box #LC328330 While no pin box is…

view full answer...

Answer 8

The Curt #C16120 and Lil Rocker RBW were both designed to fit industry standard base rails. If your current RBW rails are industry standard, then the Curt Q16 #C16120 will fit the rails you have installed in your truck bed that a RBW Lil Rocker was…

view full answer...

Answer 9

Thank you for your question! We have some air bag kits that are compatible with 5th wheel base rail kits but I would need to know what brand base rails you have on your 2000 Ford F-250. If you could let me know or send me a picture of the base…

view full answer...

Answer 10

We have an air bag suspension enhancement kit that fits your 2000 Ford F-250 that is also compatible with an in-bed hitch with the Firestone part #F2550 but the Air Lift you mentioned is not it. There isn&#39;t a longer bolt solution or…

view full answer...

Answer 11

The door latches for your Furrion RV Refrigerator - 4 Door - Stainless Steel - 14 Cu Ft #FCR14ACBQASS are part #7 in the diagram below and can be activated by simply pushing the doors in until you hear a click noise.

view full answer...

Answer 12

While the Curt Q-series of fifth wheel hitches are not compatible with the Rota-Flex line of pin boxes, the Curt A-Series line of pin boxes are compatible. The head of the hitch and the pin box actually work against each other so that&#39;s…

view full answer...