Is Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 Waterproof

Question

Question:

Was just wondering if this part is waterproof I live in an area where it has a lot of rain and snow and need something sealed

asked by: Travis

1

Helpful Expert Reply:

The Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 that you referenced is weather proof enough that as long as you didn't submerge the landing gear underwater the jacks would be just fine. Rain and snow wouldn't be an issue at all.

expert reply by: Jameson C

1

Answer 1

The motors of the Ultra-Fab #UF17-943010 landing gear are encased in plastic covers to keep moisture out, so they can be exposed to weather but they're not meant to be immersed in water. They'll be fine if exposed to splashing and the typical…

view full answer...

Answer 2

Yes, you can attach the roller bunks #DL21741 to swivel brackets. The brackets will not be able to swivel independently of one another though once attached to a rigid item like the frame of the roller bunks. The brackets that are associated with…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 8

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Is Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 Waterproof

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching