Will a Curt Front Mount Trailer Hitch Work with a Warn Multi Mount Kit On a 2008 Toyota FJ Cruiser

Question

Question:

I am considering installing this hitch for a 2008 fj cruiser. I am also considering its use with a warn multi mount kit and a 9000# warn winch. Do you think this setup would be ok?

asked by: Albert B

0

Expert Reply:

The Curt Front Hitch for the 2008 FJ Cruiser , item # 31367, and the setup you are describing should work well, as long as the multi mount you are referring to is designed to fit into a 2 inch receiver.

If you already have the winch but not the hitch mount, the Bulldog Hitch Mounted Winch Mounting Plate with Handles, item # BDW20011, will work with the mounting pattern of the Warn winch also.

expert reply by: Robert G

0

Answer 1

I spoke with my contact at Curt on whether or not the Front Mount Trailer Hitch Receiver, #31367, can be installed on your 2008 Toyota FJ Cruiser with the grille guard in place. While he did not have any notes stated that it would not fit the Trail…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 4

There is a trailer coupler designed specifically to be used for offroading, from Lock N Roll. This uses an articulating connection between the coupler and accompanying hitch mount that gives a full 360 degree rotation between the two. So the trailer…

view full answer...

Answer 5

Yes, the Curt Front Mount Hitch #31367 will indeed fit a 2012 Toyota FJ Cruiser. It has a 350 lb vertical load limit so it can certainly be used for a spare tire mount. A really good option for a carrier is our etrailer Hitch Mounted Spare Tire…

view full answer...

Answer 6

We do have a set of install brackets for your 2005 Toyota 4Runner that will work with the Detail K2 Summit II part #K2SUMM8826ELT with the part #K285122.

view full answer...

Answer 7

The Roadmaster Sterling tow bar #RM-576 is compatible with all Roadmaster base plates including XL base plates #1183-1 for the 2007 Toyota FJ Cruiser. The XL base plates will use the quick disconnects that came with the tow bar. It sounds like your…

view full answer...

Answer 8

The correct Rhino-Rack Pioneer Platform Rack Kit for your 2013 Toyota FJ Cruiser if it has a bare roof is part #RR25TB for the 84" long x 49" wide platform along with the Rhino-Rack Backbone Mounting System part #RRRFJB1 that you will need…

view full answer...

Answer 9

I would be happy to help you get the correct equipment so that you can flat tow your 2014 Toyota 4Runner. Keep in mind that since your manual says not to flat tow your 4Runner with all 4 wheels on the ground that any damage that could potentially be…

view full answer...

Answer 10

I do have a solution for you, however, I do not see any way to connect your Roadmaster Crossbar-Style Base Plate Kit #1185-1 to the Ready Brute Elite tow bar. Your best bet is to go with Roadmaster Falcon All Terrain Tow Bar #RM-522 as this will…

view full answer...

Answer 11

Though we have options for a back up camera for your 2007 Toyota FJ Cruiser we will not have a third light camera for your Cruiser. So the Rear View Safety Third Brake Light with Camera #RVS-1016 will not work. One of the most popular options for a…

view full answer...

Will a Curt Front Mount Trailer Hitch Work with a Warn Multi Mount Kit On a 2008 Toyota FJ Cruiser

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching