Recommended Bearing Kit With L44649 Bearings As Well As Grease Caps For Marine Application

Question

Question:

Do you have a kit that includes the following items? 4-L44649 bearings 4- L44610 cups 2- 471750 seals 2- 1.980 grease caps. 2- cotter pins Items are for a marine application. Any help you can provide will be appreciated. Thanks

asked by: Mike A

0

Expert Reply:

I recommend you get two bearing kits # BK1-150 along with the Bearing Buddy Bearing Protectors - Model 1980T-SS - Threaded - Stainless Steel (Pair) # BB1980T-SS. These are made specifically for marine applications.

If you want regular grease caps, you will want # RG04-020. These are 1.988 inch outer diameter and the closest to the measurement you gave that we carry with the exception of the Bearing Buddy Caps.

expert reply by: Jason S

0

Answer 1

The difference between the High Temperature Grease, like part #L11465, and the Marine Grease, like part #L54FR, has to do with what they are used for. The high temperature grease is great for dry application where your trailer is not meant to be…

view full answer...

Answer 2

We have a few bearing kits that could potentially work for your utility trailer, but we first need to determine what you have on your trailer so that we can pick out the correct parts. What you would need to do is remove a current hub and get the…

view full answer...

Answer 3

No, we currently only have the part #L54FR which is 3-3 oz cartridges. You can use this with or without a grease gun.

view full answer...

Answer 4

After packing the bearings, making sure that every space of the bearing has been filled with grease, you should also apply a thin layer of grease to the trailer spindle. As long as the bearings are properly packed, this is all you need to do. Using a…

view full answer...

Answer 5

The inner diameter of bearing #L44649 is 1.063 inches. The inner diameter of bearing #L68149 is 1.378 inches. Both fit on a #84 spindle. The matching race for bearing L44649 is #L44610. And the matching race for bearing L68149 is #L68111. These…

view full answer...

Answer 6

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

After you've packed the bearings and assembled everything, carefully slide the hub assembly onto the spindle and install the outer bearing. Install the spindle and tang washer and run the spindle nut down finger tight, then rotate the hub back…

view full answer...

Answer 9

Based on the GVWR of your 2019 Jayco North Point 315RLTS it does seem like you have 7k axles. I recommend verifying this information to be sure. These axles typically use the #14125A outer and #25580 inner bearing found in the Timken #TMK92VR.…

view full answer...

Answer 10

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 11

The ALKO 4,400 lb axles use the same bearing sizes as the standard 3,500 lb alxes. If you want USA made bearings, I recommend the Bearing Kit #TMK52VR. This kit comes with the Timken brand bearings which are all made here in the USA.

view full answer...

Answer 12

We recommended to repack the wheel bearings on your trailer every 12 months or 12,000 miles. There is not a specific guideline as far as actually replacing the bearings. When repacking them with grease, you will also just want to check for any damage…

view full answer...