Will Dexter Brake Assemblies 23-105 and 23-106 Replace Kelsey Hayes RH602041 LH602042

Question

Question:

I have a 1982 industrial trailer with 12x2inch electric brakes Kelsey Hayes co RH602041 LH602042. Do you know what brakes will fit this trailer? I was told dexter 23-105-09 and 23-106-09 would work but Im not sure. Can you guys help me?

asked by: Frank

0

Expert Reply:

Most likely the # 23-105-09 and # 23-106-09 would work well for you, but you need to verify one more thing. Does the current brake assembly you have attach to the axle with 5 nuts? If so, then you have the standard bolt mounting pattern these two would fit well. These are 6k capacity assemblies as well.

expert reply by: Jameson C

0

Answer 1

For your 12x2 electric brake assemblies, I recommend the Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange - 12" - Left/Right Hand Assemblies #23-105-106-09. These assemblies will fit your 4 bolt flange and will work well on your trailer.…

view full answer...

Answer 2

When it comes to brakes for your boss's older Flying L gooseneck horse trailer, I believe that I have exactly what you are looking for, #23-105-09 and #23-106-09 for a 6,000 lb axle. I have included a picture which includes the mounting hole…

view full answer...

Answer 3

The #23-105-09 would work well since the dimensions and bolt pattern are correct for your Hayes 7k setup. Typically brake assemblies in this size will have weight ratings that range from 5,200 up to 7k so the #23-105-09 will work well as they match…

view full answer...

Answer 4

We do offer 12 x 2-inch electric brake assemblies with a 4-bolt mounting flange. Dexter parts #23-106-09 and #23-105-09 are right- and left-hand brake assemblies that have dual mounting hole patterns, both 5-hole and 4-hole. These brakes are rated…

view full answer...

Answer 5

The Dexter Braking Assemblies like the #23-464-465 are widely regarded as the highest quality assemblies due to them being manufactured right here in the USA and using the highest quality materials available. With that said we have sold a lot of the…

view full answer...

Answer 6

The Dexter brake assemblies part #23-105-106-09 can mount to the AL KO 4 bolt mounting flange. If the upper mounting bolt holes are further apart than the lower bolt holes these assemblies will fit and work well.

view full answer...

Answer 7

There are a couple things to consider. The bolt pattern you are seeking is for a much smaller axle so there are not hubs compatible with the spindles you have and that bolt pattern. The fit we have for the measurements you gave are only the 8 on…

view full answer...

Answer 8

The center hole diameter on the Hayes/AL-KO 12 x 2 Electric Brake Assembly, part #185100, is 3-1/4 inches (3.25). This #185100 brake assembly has the standard 5-bolt mounting pattern. For the standard 5-bolt mounting pattern the distance between the…

view full answer...

Answer 9

The brake magnet can indeed be in direct contact with the armature surface of the brake drum, regardless of whether or not the magnet is energized. This doesn't present a problem unless the drum is worn and has grooves in the armature surface.…

view full answer...

Answer 10

The difference between the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs #23-180-181 and the #23-105-106 you mentioned are the strength of the brake magnets. The #23-180-181 was designed for 7000lb axles…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Will Dexter Brake Assemblies 23-105 and 23-106 Replace Kelsey Hayes RH602041 LH602042

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching