Is There A 3 Inch Hitch Receiver To 2 Inch Receiver Sleeve Reducer Available?

Question

Question:

I recently purchased a Blue Ox Tow Bar and Patriot braking system for flat towing a wrangler behind a coach. I thought I had a 2.5inch hitch receiver so also got a 2.5 x 2 sleeve reducer. Recently went to hook it up and realize I have a 3inch hitch receiver so need a 3inch x 2 sleeve reducer. Can you supply this? Thanks

asked by: Jeff C

0

Expert Reply:

Absolutely. For your 3 inch receiver, I recommend the Buyers Products 3" to 2" Receiver Tube Adapter
Item # 337RTA302. This will allow you to use your Tow Bar without issue.

expert reply by: Jason S

0

Answer 1

The Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K #23-468-469 are not designed to be manually adjusted in the way you are describing. There isn't really a way to back off the adjustment because…

view full answer...

Answer 2

The fix for towing a 5th wheel with a short bed truck is either a slider hitch or for beds that are shorter than 6-feet a replacement trailer pin box called a Sidewinder. Sidewinders move the trailer pivot point 22-inches back from the king pin, to…

view full answer...

Answer 3

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Answer 4

Yes, there is a front mounted hitch for your 2022 Ford F-350 dually with a diesel engine. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH83GR. This hitch is custom fit and bolts to your Ford with included hardware. This front…

view full answer...

Answer 5

The outer tube dimensions of the Buyers Products Black Receiver Tube #337RT25818B are 2-1/2" x 2-1/2" square. The length of the tube is 18" long.

view full answer...

Answer 6

For your 2 inch tongue the Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lb #CT-3001-Z is my recommendation. Then I'd use the Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt…

view full answer...

Answer 7

I do have a way for you to use your Avail tow bar with a 3-inch hitch receiver, however, there are no replacement shanks that fit a 3-inch hitch receiver. All you need to use a tow bar that fits a 2-inch hitch receiver in a 3-inch hitch receiver is…

view full answer...

Answer 8

You'll need to do some slight measuring to ensure the fit of the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV on your 4WD 2022 Ford F-350 FX4 dually. Just measure from the top of the rear axle to the top of the jounce…

view full answer...

Answer 9

The Westin Custom Fit Truck Bed Mat #50-6405 will fit perfectly in your 2022 Ford F-250 Super Duty Short Bed and you won't need to trim anything! Just be mindful that these come rolled up in a box so you'll need to unroll it and let it rest…

view full answer...

Answer 10

The total weight of the B and W Companion Slider Hitch part #BWRVK3370 that you referenced is 266 lbs.

view full answer...

Answer 11

The reason most hitch pins don't come with weight ratings is because they don't bear the full weight of the accessory. If you are towing a trailer for example then you would be using a ball mount and the tongue weight from the trailer would…

view full answer...

Answer 12

That's a good question and to reduce the 3" receiver in your 2019 Ford F-350 to a 2" receiver I recommend using the Buyers Products 3" to 2" Receiver Tube Adapter #337RTA302. The reason is, this is a single-piece reducer which…

view full answer...

Is There A 3 Inch Hitch Receiver To 2 Inch Receiver Sleeve Reducer Available?

Product Page this Question was Asked From

Continue Researching