Does Hitch Lock and Cable Lock Come with Swagman XTC4

Question

Question:

I am thinking of buying Item # S64665. In the photos of the product there is a locking hitch pin. Is this included or a separate item to purchase?

asked by: Brian C

0

Expert Reply:

The locking hitch pin and cable lock that you see in the product pictures is included with the Swagman XTC4 part # S64665 that you referenced. You would not need to purchase that separately.

expert reply by: Jameson C

0

Answer 1

In order for the Swagman XTC4 Bike rack part #S64665 to fit on your 2007 BMW X3 you will need to have a hitch installed on it with a 2 inch opening. See pic and FAQ I attached on this. If you have a 2 inch hitch you would be good to go with this…

view full answer...

Answer 2

You will need to take one measurement on your spouses Mercedes ML350 to determine if the Swagman XTC4 part #S64665 would fold up and clear the bumper of the vehicle. You will need to measure from the center of the hitch pin hole out to the furthest…

view full answer...

Answer 3

I would choose the Swagman S64665 over the SportRack part #A30902LR in this case, hands down. The Swagman base is a bit heavier. They are both steel racks, so they would not hold up as well as an aluminum rack would, but I think the Swagman finish…

view full answer...

Answer 4

The Swagman XTC4, #S64665, will work on your Honda Pilot if you have a 2 inch receiver opening on your trailer hitch. If you do not, I can recommend a hitch but I need the year of your Honda Pilot. But if you do have a 2 inch hitch, the rack will…

view full answer...

Answer 5

The Swagman XTC4, item #S64665, will accept many different styles of bike frames. The frame ratchet hooks will adjust to approximately 13 inches above the wheel holders. You can also adjust the wheel holders left and right somewhat to accommodate…

view full answer...

Answer 6

The Swagman XTC4 4-Bike Rack part #S64665 does indeed come with locks, both a hitch pin bolt to secure the rack to the receiver and a steel cable to secure the bikes to the rack. I have attached for you a full list of parts that come with.

view full answer...

Answer 7

I spoke with my contact at Swagman. She stated that the Swagman XTC4, #S64665, measures 40 inches long. I went out to the warehouse and assembled one of the XTC4 bike racks. The rack has an 8-1/2 inch rise from the center of the hitch pin hole to the…

view full answer...

Answer 8

Actually loading a womans bike on the Swagman XTC4, #S64665, is the same as for a mens bike. The issue on alternative frame bikes is the top frame tube often dips lower instead of going straight across like on a typical mens bike. I have included a…

view full answer...

Answer 9

Yes, the 4 Bike Rack for 2 Trailer Hitches, Wheel Mount - Swagman XTC4, part #S64665, comes with an anti-rattle hitch pin, but this is not a lock. The Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2 inch Hitch Racks is part #S64027.

view full answer...

Answer 10

The trailer hitch I recommend for your vehicle is the Draw-Tite Trailer Hitch Receiver, part #76226. This is a Class lll hitch and it has a 2 inch receiver opening. The hitch's crosstube is hidden behind your rear bumper, retaining the factory…

view full answer...

Answer 11

Hitch extensions cut the tongue weight capacity of the hitch they are installed in by 50 percent so they are not advisable for most setups. But if you are sure you have the Draw Tite part #75673 installed you should note that this hitch has a tongue…

view full answer...

Answer 12

I have another option for you, but the EcoHitch #306-x7275 you were looking at is only confirmed to fit the 2013-2017 BMW X3 and will not fit your 2018 BMW X3 M40i. Instead I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit -…

view full answer...