Can Curt A20 Fifth Wheel Hitch Head Fit on Curt Fifth Wheel Leg Kit C16021  

Yes, the Curt E16 Hitch Head can be swapped out for the Curt A-Series or Q-Series. The A-Series is the new design and what I recommend using. It has a more secure locking jaw system than the Q-Series among a few other things. I recommend using part…

The highest capacity B&W Companion 5th wheel hitch available for your 2022 GMC Sierra 3500 long bed would be part #BWRVK3715 which has a 25K capacity. For a higher capacity alternative, the Curt #C36WR PowerRide has a 30K capacity. The hitch…

The two best options from what you mentioned are the Reese M5 part #RP30918 and the Companion #BWRVK3600. If you wanted to go with a Curt the A25 part #C16046 would be the better option as this essentially is the updated version of the Q series with…

I checked with Curt for you, and the head unit of the Curt Q20 is not compatible with the legs of the Curt A20 as they mount differently. So what you would need instead is the head unit of the A20, which is the Replacement Head Unit for Curt A20 5th…

You are correct the B&W Companion does weigh more then the Curt A25 at 42 lbs. Here are the break downs below of the individual weights. I recommend the B&W Companion over the Curt for reliability and it is made in America. I have linked a…

I would be happy to help you break down the weight of the Curt A25 5th Wheel Trailer Hitch for Ram Towing Prep package item #C16046. The entire unit weighs 184 lbs. The Head Unit for Curt A25 5th Wheel Trailer Hitch item #C16580 weighs 96 lbs. The…

Absolutely. The Curt A25 or Q25 hitch head can use the Curt OEM 5th Wheel Hitch Legs for Ram Towing Prep Package - 24,000 lbs #C16021. So you can remove your current legs and use this new base that will work with your Ram factory puck system. It will…

The zerk fittings for the Curt A20 hitch part #C16140 are located on the front of each jaw.The jaws must be in the closed and locked position for the zerks to be accessible. They are kind of hard to see but I attached a picture that points them out.…

The hitch jaws that grip the 5th wheel's king pin and the suspension system (for the lack of a better term) for the hitch head are the main differences between the A25 and the Q25. The A25 like the #C16180 uses an interlocking jaw system that…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…