Replacement Hitch Pin Recommendation for Yakima Stickup Bike Rack

Question

Question:

I have a Yakima stickup but have lost the 2 inch hitch bolt pin. Will one of the other Yakima pins work? If so which is the cheapest one that will work. I still have the 1 1/4 inch pin and the lock but I have a 2 inch hitch. I am putting it on a 2005 ford 1/2 ton pickup. Please advise me to which pin to order.

asked by: Steve W

1

Helpful Expert Reply:

For a replacement hitch pin for your Yakima Stickup you would want the part # Y8880131. This comes with both sizes but is the same price basically as the individual hitch pins we offer for other racks so it would still be ideal for you.

expert reply by: Jameson C

1

Answer 1

The Yakima Threaded Hitch Bolts #Y8880131 have a 1/2" -13 thread pitch. I do not see we have any M20 threaded hitch pins or bolts as this is larger than a 3/4" bolt. Most hitch pins are 1/2" or 5/8" in diameter.

view full answer...

Answer 2

Yes! We do have those parts for your Yakima SwingBase #Y34VR. The replacement parts you need the Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack #Y52FR (Yakima part 8880953) and the Replacement Hitch Bolt Threaded Insert…

view full answer...

Answer 3

I checked with Yakima and for the Exo Swingbase part #Y34VR the correct replacement hitch pin bolt is the part #Y52FR.

view full answer...

Answer 4

Thanks for the picture of hitch pin, but what was really helpful was actually the set of instructions you have in the background. Based on that you have the first version of the BigHorn which was made around 2001 and the correct hitch pin replacement…

view full answer...

Answer 5

We may have the correct replacement hitch bolt for you, but they are specific to both manufacturers as well as racks, so the Saris hitch bolt you mentioned won't work for your Yakima 2-bike rack. There are a number of options for you, and to get…

view full answer...

Answer 6

I went out to the warehouse and pulled Replacement Hitch Bolt and Clip #Y8890200 to measure it. From under the bolt head to the end of the pin it measures 4-1/4 inches. And to the center of where the clip would go it measures 3-9/16 inches. If it is…

view full answer...

Answer 7

If I understood your question correctly it sounds like you are asking about the diameter of the very end of the Replacement Hitch Bolt #Y8890200. I went and pulled this from our warehouse to measure it and found it to be 3/8 of an inch. If you are…

view full answer...

Answer 8

My technical contact at Softride explained to me that the reason the Hitch Rack Lock SR25056 is only 1/2 a bolt is because the other side of the Softride bike racks have a smaller hole so a full bolt cannot pass all the way through. He did tell me…

view full answer...

Answer 9

For the now-discontinued Yakima FullSwing hitch bike rack 8002403 you can use anti-rattle mounting hardware kit #Y8780022. This includes a hitch bolt, nut, clip and anti-rattle insert.

view full answer...

Answer 10

For a replacement hitch pin for your Yakima Stickup you would want the part #Y8880131.

view full answer...

Answer 11

I spoke with Yakima and they informed me that the part you are looking for has been discontinued and is no longer available for purchase. There is also not a direct replacement either but they did say the Replacement Hitch Bolt and Clip for Yakima…

view full answer...

Answer 12

I spoke with my contact at Yakima regarding your older model 4-bike rack. He said that based on your description, the correct replacement hitch bolt is the part #Y8890200. He stated that this bolt was actually re-designed with the wider Toyota hitch…

view full answer...

Replacement Hitch Pin Recommendation for Yakima Stickup Bike Rack

Product Page this Question was Asked From

Continue Researching