Weight Distribution System Compatibility Between Different Manufacturers
Question:
Will a Husky replacement head part no. HT31516 bolt onto either Reese shank no RP3214 or a 18 in EQUALIZER part no. EQ90-02-4500 ? And does the Husky Head unit come with bolts nuts washers and grease zirks ?
asked by: Marc W
Expert Reply:
The Husky Replacement Head for Husky Weight Distribution Systems - Round Bar # HT31516 will bolt onto the Reese Weight Dist Shank - 14" Long - 2-1/4" Drop to 7" Rise - 1,400 lbs TW # RP3214 or the Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW # EQ90-02-4500. Each shank has the weight rating to work appropriately and has the same incremental adjustment of 1-1/4 inches to work properly. The shank is really the only interchangable part on a weight distribution system. Changing out other parts would effect the function of the system.
The Husky replacement head comes with only the head unit. None of the hardware. For the bolts, washers and nuts you can use # EQ90-02-9100. For a zerk fitting, you can use # T0144901 which is a standard size.
Products Referenced in This Question
Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Replacement Bolts for Equal-i-zer Weight Distribution Head - 6,000 lbs to 14,000 lbs GTW
- Accessories and Parts
- Weight Distribution Hitch
- Hardware
- Bolts
- Equal-i-zer
- Equal-i-zer
more information >
Replacement Grease Zerk for Dexter Model 10 Brake Actuator
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Grease Zerk
- Dexter
more information >
Continue Researching
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Search Results: safety chains
- Search Results: hitch wobble
- Q&A: Longer Shank Recommendation for Husky Center-Line Weight Distribution System
- Q&A: Recommended Extended Weight Distribution Shank for 2" Hitches
- Q&A: Does the Husky Weight Distribution Head Part # HT31516 Come with Hitch and Sway Control Balls
- Shop: Malone Anti-Rattle HitchLock System
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Search Results: cargo net
- Search Results: tailgate support
- Search Results: tailgate net
- Shop: Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
- Shop: Gen-Y Hitch Hitch Extender for 2" Trailer Hitches - 14" Long
- Video: etrailer Hitch Pin Alignment Collar Review
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Search Results: anti rattle
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: hitch extender
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Malone Anti-Rattle HitchLock System Review
- Q&A: Would Switching a Weight Distribution Shank to A longer One Change the Height of a WDS
- Shop: Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers
- Shop: Suspension Enhancement
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Video: Review of etrailer Hitch Alignment - Hitch Pin Alignment Collar - e98942