Where Should Curt 7-Way Trailer Adapter # C57003 be Plugged Into 2011 BMW X5 Using Prodigy RF 90250

Question

Question:

I need to use an LED adapter like Curt Adapter C57003 with my 2011 BMW X5. Where would that adapter need to go when using this wireless brake controller? Between the X5 and the control box, or between the control box and the trailers wiring connector or would either place work?

asked by: Pat

0

Expert Reply:

You would need to plug in 7-Way Trailer Adapter # C57003 directly into the 7-Way connector on your 2011 BMW X5. That way it will take care of any bulb out and brake controller pairing issues when using the Prodigy RF # TK94FR.

expert reply by: Michael H

0

Answer 1

We do offer wiring adapters for import vehicles to help them properly operate the LED lights on a trailer. If both the vehicle and trailer have a 7-way RV style connector then you can use part #C57003 from Curt. If the trailer has a 4-pole flat…

view full answer...

Answer 2

If there is a problem your lights still hyperflashing after installing the LED Light Bulb Load-Resistors #DI34ZR then it is possible you may not have installed them correctly. If you take a look at the accompanying photo you can see how they are…

view full answer...

Answer 3

Adapters like the Curt part #C57003 are designed for use on vehicles that will show a "bulb out" error code if towing a trailer with LED taillights like what your 2014 Land Rover LR4 would have. This would would well for you if your trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 11

I'm not sure why they include that replacement latch but that is not required for any of the aftermarket hitches or wiring. It is probably something related to the installation of the OEM hitch. The etrailer #e45ZR you referenced is what I would…

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Where Should Curt 7-Way Trailer Adapter # C57003 be Plugged Into 2011 BMW X5 Using Prodigy RF 90250

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching