Will Bulldog Winch Quick-Connect Set # BDW20172 Work with a Champion 2K Winch

Question

Question:

can the BDW20172 be use on champion winch 2000 lbs that hook in to receiver on 09 F 150 and how long of cable dose it have ?

asked by: Mark H

0

Expert Reply:

Bulldog Winch Quick-Connect Set # BDW20172 is designed to accept 1/0 gauge wire and can be used with your Champion winch if you wanted. The connectors do not come with any wiring or cable. On your 2009 Ford F-150 if you are talking about the trailer connector at the back then no, these connectors do not plug into it. I have included a link to our help article on various ways to wire an electric winch. Several of the methods show the use of this type of connector.

expert reply by: Michael H

0

Answer 1

I do have an option for you but 10 gauge wire is way too small for a winch, especially when you factor in the length of wire from the battery to the bumper. I recommend 1 gauge like what comes with the Bulldog Winch Rear Wiring Kit part #BDW20347.…

view full answer...

Answer 2

For a winch like the Superwinch S6000 Winch #CU854754 you will simply want to use the Trailer and Vehicle Electric Winch Wiring Kit #BDW20207. Since winches can vary on how much they can pull this also affects how much power they need. For a winch…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...

Will Bulldog Winch Quick-Connect Set # BDW20172 Work with a Champion 2K Winch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching