Availability of a 1/2 Inch Diameter Pin With a 3 Inch Length

Question

Question:

I am looking for a replacement pin that is 1/2 in diameter and 4.5 long with the straight part about 3. Do have have a pin this size?

asked by: Ray

0

Expert Reply:

We offer a hitch pin by Redline, with part # 12H which would be the closest match, as it is a 1/2 inch diameter pin with a straight pin length of 3-1/2 inches.

A similar option is the Curt # C45805, with a 1/2 inch diameter and a 3-5/8 inch overall pin length.

expert reply by: Sarah L

0

click to enlarge

Answer 1

I have included a link to a video on adjusting self-adjusting brakes. Basically there is a device on the adjustment wheel on these brakes that prevents the shoes from adjusting back inward. You have to sort of move that out of the way to be able to…

view full answer...

Answer 2

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

view full answer...

Answer 3

With the bike rack only having a 1/2" diameter pin hole that will limit you to pins that are only designed for 1-1/4" receivers. Using a bolt with washer and nut is not a good idea as it is not near as strong as the receiver pins. The Curt…

view full answer...

Answer 4

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 5

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 6

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Availability of a 1/2 Inch Diameter Pin With a 3 Inch Length

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching