1/2" Receiver Pin Lock for Bike Racks in Large 2" Receiver Hitch
Question:
We purchased a Vibrelli V70 SPORT BIKE HITCH RACK. The hole in the tongue is 1/2 inch It is made for a 2inch class 3 hitch. The hitch on our Toyota Tundra is hair over 2. The pin that came with the hitch would not latch. We bought a Master Lock 1414DAT Sleeved Pivot Lock Hitch Pin locally. The end will not pivot the full 90 degrees so it wont lock. See photo The Curt Clevis pin shows it measures 3 5/8inch but doesnt indicate the distance to the hole for the clip. It seems that after searching several stores and online that 3 5/8 is the longest 1/2inch pin. Please send the measurement up to the hole for the clip. If there are any other 1/2inch hitch pins that would be longer please advise. In the mean time we are using a bolt, washer and a lock washer. See photo It seems to be very tight. Is there any need for concern? Thank you
asked by: Chris S
Helpful Expert Reply:
With the bike rack only having a 1/2" diameter pin hole that will limit you to pins that are only designed for 1-1/4" receivers. Using a bolt with washer and nut is not a good idea as it is not near as strong as the receiver pins.
The Curt Clevis Pin with Handle and Clip # C45805 is actually 3-5/8" from the collar to the cotter pin. The video will show you the measurements on the product.
I recommend using the Trailer Hitch Receiver Lock # 5200. It will allow you to lock the bike rack onto your Toyota Tundra receiver. With the lock being straight this should allow you easy access to remove the lock when needed. The 1/2" pin will allow a span of 3-1/8" which you can verify will be enough on your receiver.
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
Trailer Hitch Receiver Lock - Padlock Style for 1-1/4" Trailer Hitch Receiver
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Chrome
- Fits 1-1/4 Inch Hitch
- Bent Pin
- 3-1/8 Inch Span
- Tow Ready
more information >
Product Page this Question was Asked From
Curt Clevis Pin with Handle and Clip - Steel - 3-5/8" Long x 1/2" Diameter
- Hitch Pins and Clips
- Clevis Pin
- 6-7/8 Inch Long
- 1/2 Inch Diameter
- 6-7/8 Inch Span
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches
- Shop: Kuat Transfer V2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount
- Shop: Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting
- Shop: Swagman Current Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches - Frame Mount
- Shop: Trailer Hitch Receiver Lock - Padlock Style for 1-1/4" Trailer Hitch Receiver
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Curt 2 Bike Platform Rack for Fat Bikes - 1-1/4" and 2" Hitches - Frame Mount - Tilting
- Article: Rooftop Cargo Carriers
- Video: Curt Trailer Hitch Installation - 2023 Toyota RAV4
- Search Results: led trailer light bar
- Shop: Trailer Wiring
- Q&A: Recommended Lights to Increase Visibility on Hitch-Mounted Bike Rack
- Search Results: 4 pin connector
- Q&A: Will the Curt Clevis Pin with Handle and Clip C45805 Fit Roadmaster Nighthawk Tow Bar for Blue Ox
- Search Results: clevis pin
- Search Results: 12" hitch pin
- Search Results: clevis hitch pin
- Article: Trailer Wiring Diagrams
- Shop: Side Window Vents
- Shop: Suspension Enhancement
- Shop: Vehicle Air Mattress
- Shop: Transmission Cooler
- Shop: Air Filter
- Search Results: tow bar
- Search Results: brake actuator
- Q&A: Wiring Diagram for the Adapter 6-Pole to 7-Pole Trailer Wiring Adapter # 47435
- Video: Roadmaster Battery Charge Line Kit Review
- Video: Blue Ox Coiled Electrical Cord Installation - 2018 Jeep JK Wrangler Unlimited
- Video: Blue Ox Base-Plate and Receiver Lock Kit Review
on Hitch Pins and Clips
