Recommended Tail Light Converter For 2003 Nissan Frontier

Question

Question:

for a NIssan Frontier 2003 Hoppy Electronic Tail Light converter Hopkins Mfg. Corp. 310-0041-560 Or equivalent

asked by: Harry B

0

Expert Reply:

For your 2003 Nissan Frontier, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118362. This has a built in tail light converter because most trailers run on a two-wire system and your Nissan has a 3 wire system. This wiring harness will connect to your vehicle wiring located along the frame rail on the rear of the vehicle. Simply plug in the connectors, attach your ground wire, secure the converter, and run the wires to your trailer.

expert reply by: Jason S

0

Answer 1

For your 2020 Jeep Gladiator we have the CIPA tow mirrors part #11953-2 which will fit and work great. These install easily, mount securely, and since they have a dual view mirror on either side gives you the best visibility overall. We had a chance…

view full answer...

Answer 2

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

view full answer...

Answer 3

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

view full answer...

Answer 4

It sounds like you are looking for a trailer hitch for your 2002 Nissan Frontier Crew Cab Long Bed. For that you will want the Draw-Tite Class 3 Trailer Hitch #75186.

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

The tires in your size that we offer have varying pressure ratings depending on their load capacity. For example, if you look at the tires in your size shown on the link I have included you will see that those rated for Load range E, such as…

view full answer...

Answer 7

First you will need the 7-Way RV Upgrade Kit #ETBC7L which will connect to the 4-way on your 2024 Toyota Grand Highlander. The kit includes the wiring needed to power the charge line which will allow you to use the Curt Echo Trailer Brake Controller…

view full answer...

Answer 8

Curt trailer hitch #13842 does NOT fit the 2002 Nissan Frontier long bed according to Curt. However we do have a hitch that fits all models of the 2002 Nissan Frontier, long or short bed, 2 or 4 door. Take a look at Draw-Tite trailer hitch #75186.…

view full answer...

Answer 9

The best brake controller for your 2024 Toyota Grand Highlander is from Redarc, and the correct part number for it and the needed wiring adapter is the following: - Redarc Tow-Pro Liberty Trailer Brake Controller #RED24FR - Wiring Adapter for Tow-Pro…

view full answer...

Answer 10

Your vehicle requires a converter to convert the trucks 5-Wire system down to the 4-Wire system used on trailers. You will find a connection point behind the rear bumper on the passenger side frame rail, that you will use to plug in the Plug-N-Tow…

view full answer...

Answer 11

The situation you are describing sounds like a classic ground issue. When the tail lights are on the amperage draw is the greatest and if the grounding point chosen is not sufficient the lighting will not function properly. Since you have tried two…

view full answer...

Answer 12

The part number 43515 is our part #33515. We have quite a few reviews on this wiring harness where our customers have said that it worked well for them. I am sure we have a similar harness by a different manufacturer that you could try. But without…

view full answer...