Will Classic Accessories Fifth Wheel Hitch Cover CA80116 Fit Curt Q24 Hitch

Question

Question:

I have a Curt Q24 direct mount hitch in my Ram truck fits factory fifth wheel prep package. Will the Classic Accessories cover fit this hitch setup? If not, is there another cover you recommend? Thank you for your help.

asked by: John J

0

Expert Reply:

We pulled a Classic Accessories Cover, part # CA80116 from our warehouse and installed it over a Q20 hitch which is the same size as a Q24.

I took a photo of it installed and as you can see in the attached photo it fits just fine. This cover has made of heavy-duty waterproof Black vinyl and measures 24 x 24 x 18 inches. It also features elastic cords with hooks that secure the cover to your fifth wheel rails.

expert reply by: Jameson C

0

click to enlarge

Jason S.

5/18/2020

Recommended Cover for B&W Companion RVK3715 5th Wheel Hitch

Reply

Chris R.

5/21/2020

The best option we have to cover your Companion is the Classic Accessories # CA80116. This will cover most of the hitch but a portion of the legs will still be exposed. If you check out the pictures on the product page there are a couple customer-submitted photos of it being used on the Companion. There isn't a Companion-specific cover available.

Reply

Answer 1

I pulled a Classic Accessories Cover, part #CA80116 from our warehouse and installed it over a Q20 hitch. I took a photo of it installed and as you can see in the attached photo it fits just fine. This cover has made of heavy-duty waterproof Black…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

Answer 6

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 7

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

You will need the Ceiling Garnish for Fan-Tastic Vents Roof Vent #FVK1060-81 as it is specific to your Dometic Fantastic Fan 1450. The Ceiling Garnish for Ventline Roof Vent #VA0445-37 is going to have rounded corners as opposed to the square on the…

view full answer...

Answer 11

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Will Classic Accessories Fifth Wheel Hitch Cover CA80116 Fit Curt Q24 Hitch

Product Page this Question was Asked From

Continue Researching