Block Heater Recommendation for 2012 Toyota Tacoma 4 Cylinder

Question

Question:

I am looking for a block heater for a 2012 Tacoma, automatic 4 cylinder. Please give me the link for the part thank you

asked by: Peter G

0

Expert Reply:

For your 2012 Toyota Tacoma we have the Kat's Frost Plug heater part # KH11481 as a confirmed fit.

expert reply by: Jameson C

0

Answer 1

I checked with Kat's about the correct engine block heater for your 2012 Toyota Tacoma with a 2.7L I4 engine, I confirmed that the correct fit is the Kat's Heaters Custom Engine Block Heater #KH11481. According to Kat's, this…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

If your 2017 Ford Explorer has the factory prep towing package installed, then you might have a brake controller plug-in wiring on the vehicle to connect your brake controller. However, not all models with the tow package had the wiring installed…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

The standard Valterra replacement valves like the part #T1003PBC are designed to attach to a remote handle that's further away while the Valterra Bladex like part #T1003VP the handle is right at the valve instead. Both valves are…

view full answer...

Answer 6

For the Valterra #TC372 the bolt pattern is 3-3/4", and the overall length, minus the protrusion, is 13-7/8". For the Valterra #TC172 the bolt pattern is 2-1/2", and the overall length, minus the protrusion, is 9-1/4". I have…

view full answer...

Answer 7

The Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 400 Watts - 35 mm Item #KH11481 is not compatible with the 3.5L on the 2017 Toyota Tacoma. The only option for the 3.5L is the Kat's Heaters Ether Start Fluid Injection…

view full answer...

Answer 8

I confirmed with the manufacturer that Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11813 will indeed fit your 2021 Toyota Tacoma V6. This installs very simply as you can see in the attached demonstration…

view full answer...

Answer 9

You do not need to buy a special cover for a pop up camper with an A/C unit, just a larger size depending on the height of your A/C unit. The Classic Accessories Pop-Up Camper Cover, part #CA80042, you have referenced is designed for campers that are…

view full answer...

Answer 10

I recommend the Classic Accessories Deluxe PolyPro III Heavy-Duty Pop-Up Camper Cover, part #CA80038 for your 8 X 10 pop-up camper. This cover has corrosion-resistant grommets and draw cords that help to give a tight, secures fit and keep out rain,…

view full answer...

Answer 11

Your tractor uses a Daedong 0.9 liter motor. I checked with Kat's haters and they do not offer a custom fit heater for any of the Daedong motors. But we do over oil/transmission pan pad heaters such as #KH24050 and others. I have included a link…

view full answer...

Answer 12

The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11813 is a confirmed fit for the 3.5L V6. You should not need to alter the element or clip in any way and doing so is not recommended. You may want to…

view full answer...

Block Heater Recommendation for 2012 Toyota Tacoma 4 Cylinder

Product Page this Question was Asked From

Continue Researching