Will Reese Fifth Wheel Hitch 30046 Fit Rails of Rail Kit part # RP50082-58

Question

Question:

I have a Reese hitch part number 30046. Is this hitch compatible with install kit RP50082-58? The truck is a 2000 Ford f-350 long bed single rear wheel.

asked by: Brandon D

0

Expert Reply:

Yes, your Reese fifth wheel hitch part number 30046 will fit the industry standard rail dimensions of the Reese Fifth Wheel Rail kit part # RP50082-58.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The difference is the finish on the rails. The part #C16104 is a gloss finish whereas the part #C16204 is a matte black finish.

view full answer...

Answer 2

Yes, the Curt Custom Fifth Wheel Installation Kit for Dodge Ram #C16420-104 would be compatible with the Reese 30046 5th wheel hitch. The Reese 30046 5th wheel hitch will use industry standard mounting points for installation and that is what the…

view full answer...

Answer 3

I went to the warehouse to take some measurements of the Curt #C16104 base rails and found that they are 43" long and roughly 5-5/8" wide. I have added a photo showing some of the dimensions of the mounting holes for you as well. Center to…

view full answer...

Answer 4

Yes, the Curt Custom Fifth Wheel Installation Kit part #C16420-104 is a confirmed fit for your 2012 Ram 3500 with the 6-1/2' bed. I checked this Curt as well. The kit is a custom fit so no drilling in the frame rail will be required. I have…

view full answer...

Answer 5

If you have Curt above the bed 5th wheel rails like in kit #C16420-104 that you have referenced then the correct brackets for a 2012 Dodge Ram 3500 long bed are #C16420. However, if you have rails from a different manufacturer, you have to match the…

view full answer...

Answer 6

A universal 5th wheel base rail kit, such as the Curt #C16100, will fit a wide variety of pickups and so can be moved from the 2006 Ford F350 to your 2012 Dodge Ram 2500 with 8-foot bed. Universal base rail kits like this tend to take longer to…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 11

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 12

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Will Reese Fifth Wheel Hitch 30046 Fit Rails of Rail Kit part # RP50082-58

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching