Will the Curt Custom 5th Wheel Installation Kit for Dodge Ram Work w/ a Reese 30046 5th Wheel Hitch

Question

Question:

I have a 2012 Ram 3500 8ft bed. Is the curt C16420-104 rail and mounting kit compatible with a Reese 30046 hitch?

asked by: Tom

0

Expert Reply:

Yes, the Curt Custom Fifth Wheel Installation Kit for Dodge Ram # C16420-104 would be compatible with the Reese 30046 5th wheel hitch. The Reese 30046 5th wheel hitch will use industry standard mounting points for installation and that is what the # C16420-104 will provide you.

expert reply by: Scott S

0

Answer 1

The difference is the finish on the rails. The part #C16104 is a gloss finish whereas the part #C16204 is a matte black finish.

view full answer...

Answer 2

If you have Curt above the bed 5th wheel rails like in kit #C16420-104 that you have referenced then the correct brackets for a 2012 Dodge Ram 3500 long bed are #C16420. However, if you have rails from a different manufacturer, you have to match the…

view full answer...

Answer 3

A universal 5th wheel base rail kit, such as the Curt #C16100, will fit a wide variety of pickups and so can be moved from the 2006 Ford F350 to your 2012 Dodge Ram 2500 with 8-foot bed. Universal base rail kits like this tend to take longer to…

view full answer...

Answer 4

Yes, the Curt Custom Fifth Wheel Installation Kit part #C16420-104 is a confirmed fit for your 2012 Ram 3500 with the 6-1/2' bed. I checked this Curt as well. The kit is a custom fit so no drilling in the frame rail will be required. I have…

view full answer...

Answer 5

I went to the warehouse to take some measurements of the Curt #C16104 base rails and found that they are 43" long and roughly 5-5/8" wide. I have added a photo showing some of the dimensions of the mounting holes for you as well. Center to…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Will the Curt Custom 5th Wheel Installation Kit for Dodge Ram Work w/ a Reese 30046 5th Wheel Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching