Recommended Towing Mirrors For 2011 Jeep Grand Cherokee

Question

Question:

Need an extension mirror for 2011 Grand Cherokee. What do you have? Thanks

asked by: Terry H

0

Expert Reply:

For your 2011 Jeep Grand Cherokee, I recommend the K-Source Universal Dual Lens Towing Mirrors - Clip On - Pair, # KS3990. These mirrors have dual adjustable mirrors to expand your view. They have a clean plastic housing to resist corrosion and rust and give it a nice, sleek look. These mirrors simply use adjustable clips on one side of your factory mirror and use heavy duty rubber ratcheting straps to secure it in place and reduce vibration on the back side. There is a quick release for easy adjustment and removal. They are designed to tightly fit your factory mirrors without causing any marks or scratches. They offer easy installation and removal with no tools required.

expert reply by: Jason S

0

Answer 1

The Atwood jack 80274 was an A-frame type side-wind tongue jack with a 2K weight rating which we have several options for that would work great as a replacement. The Pro Series Round, A-Frame Jack w/ External Gearbox #PSRV20000103 that you referenced…

view full answer...

Answer 2

All of the sidewind jacks like the part #PSRV20000103 will have an outer diameter of 2 or 2-1/4 inches. This one happens to be 2-1/4 inches. You would have to open up the lower hole to match the correct size of the larger jack. A qualified fabricator…

view full answer...

Answer 3

The towing mirrors that I recommend for your 2015 Cadillac Escalade are the K-Source Universal Towing Mirrors part #KS3891-2. I understand these may not have the look you are going for but they do in fact perform really well as they have a very tight…

view full answer...

Answer 4

The Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks - 6" Extension #FA88-00-6500 will most likely not flip vertical when it makes contact with the ground in the horizontal position. It is designed to flip first when being deployed…

view full answer...

Answer 5

Based on my research the Atwood jack 80274 was an A-frame type side-wind tongue jack with a 2K weight rating. The Pro Series jack #PSRV20000103 that you referenced is a suitable replacement for this discontinued product. The Pro Series offers a 2K…

view full answer...

Answer 6

I do have a solution for you, however there are no custom-fit slip on towing mirrors currently available for your 2013 Jeep Grand Cherokee. I instead recommend looking at a universal option like the K-Source Universal Towing Mirror #KS3891. This is…

view full answer...

Answer 7

I took a look at the owner's manual for the 2012 Jeep Grand Cherokee Laredo V6 3.6L. The 3.6L engine Grand Cherokee can tow a 5,000 lb trailer. That figure is the gross weight so that would include all of the cargo inside the trailer. You want to…

view full answer...

Answer 8

The biggest thing that causes trailer sway is not having enough tongue weight on the trailer. If the tongue weight isn't between 10 and 15 percent of the total trailer weight you'll end up with sway. The other less common cause is worn out…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...