Will BOLT Spare Tire Lock Work on Boat Trailer Spare Tire

Question

Question:

Will this work for a boat trailer 6 lug wheel pattern?

asked by: Jeff D

0

Expert Reply:

Technically yes, the BOLT Spare Tire Lock # BL5922986 will lock onto a boat trailer's spare tire and will hold up to possibly being submerged. The problem you will run into is the lock is designed to fit into the recessed well that you won't normally find on trailer wheels. If you use the lock on a wheel where the entire lock is exposed it would be fairly easy for a would-be thief to get to the lug nut and spin it off by hand.

A better option for your trailer's spare tire might be the etrailer.com Spare Tire Lock # e98892. This fits wheels from 1/4 to 7/8 inches thick and can be keyed alike if for multiple locks.

expert reply by: Charles S

0

Answer 1

The etrailer.com Spare Tire Lock #e98892 is designed for use with standard trailer wheel bolt holes which are typically 1/2 inch in diameter as the smallest.

view full answer...

Answer 2

That's a really good question, and what you want to measure is the thickness of the rim at the bolt hole, including the mounting plate, for the etrailer Spare Tire Lock for 1/4" to 7/8" Thick Rims #e98892. So long as it is…

view full answer...

Answer 3

As long as there is an open lug bolt opening in the wheel that has 3/4 inches of clearance behind it on your 2009 Jeep Wrangler Sahara rear mounted spare wheel you will be able to use the Spare Tire Lock, item #e98892. I have added a photo showing…

view full answer...

Answer 4

I went out to our warehouse for you and measured the etrailer Spare Tire Lock part #e98892, the outer diameter of the lock core is 1.13".

view full answer...

Answer 5

The equalizer of a tandem axle trailer is not the balance point of the trailer. I would recommend putting the wheel chocks of your trailer as far forward as you can in the trailer. This will help prevent any potential sway that can occur from not…

view full answer...

Answer 6

When securing your motorcycle inside your enclosed 12 foot long trailer using a chock like the Tow-Rax #TWSPWM the most important factor to consider is the trailer's tongue weight. You will just want to make sure that its tongue weight with the…

view full answer...

Answer 7

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 8

The Seal POS1501925TB is for oil and it has an inner diameter of 1.5" and an outer diameter of 1.987". We don't have an oil seal in this size but we do have a grease seal, the Grease Seal part #10-9 which measures 1.500" inner…

view full answer...

Answer 9

Since you can be looking at a max weight capacity of 14K you need a tire rated for at least 3.5K so that it can accommodate up to that weight. For your application I recommend using the Kenda Karrier ST235/85R16 Radial Trailer Tire #AM10295 because…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The power requirements for the EverChill mini fridge part #324-000110 are .8 amps at 115 volts AC. You could easily use an inverter like the part #DU78FR with it.

view full answer...

Will BOLT Spare Tire Lock Work on Boat Trailer Spare Tire

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching