Can A-iPower 2000-Watt Inverter Generator With Parallel Kit Work With A Honda 2000 Generator?

Question

Question:

Can this be safely paired with the Honda 2000 generator?

asked by: MRy

0

Expert Reply:

The A-iPower 2,000-Watt Inverter Generator w/ Parallel Kit - Senci Motor - Portable - Gas - 120V, # 289-SUA2000I is designed to be paired with a second identical model. They have not tried pairing it with other brands, so they can't confirm or deny a fit. As I spoke with their tech, he said that they have had many customers ask but they haven't been able to confirm either way yet as they haven't heard back from those customers.

expert reply by: Jason S

0

Answer 1

To connect your A-iPower 2,000 #289-SUA2000i in parallel you must first decide which generator you want as primary, and which one you want to be secondary; there is no set rule on which has to be which. Then, put the parallel connection wire 1 and 2…

view full answer...

Answer 2

Per the manufacturer, all of the inverter generators that are already parallel compatible (such as the SC and SUA lines like the #289-SUA2000I you were looking at) are compatible for use in parallel with other units. Since both the SC2300 and SC2000…

view full answer...

Answer 3

According to Roadmaster, the #RM55VR Reflex Steering Stabilizer is compatible with vehicles equipped with a steering damper. The steering damper will remain in place once the steering stabilizer is installed, and will work along with it.

view full answer...

Answer 4

Based on the GVWR of your 2021 Thor BH 35 motorcoach the rear sway bar you'd want is the part #RM-1139-190 which makes the biggest improvement to ride quality and stability. Then for a front bar you'd want the part #RM-1139-148 which would…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The best air bag kit for your 2020 Ford F-250 Super Duty with a single rear wheel are the Firestone Ride-Rite Air Helper Springs because they are the strongest, most durable air bags on the market to provide you with optimal support for your…

view full answer...