What's the Difference Between the Kuat NV 2.0 2-Bike Rack and the Kuat NV 2.0 Base Bike Rake

Question

Question:

From what I can see the only differences between the racks is the finish color, and the repair stand. Am I missing anything?

asked by: Armin C

0

Expert Reply:

The Kuat NV 2.0 2 Bike Platform Rack, # NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, # BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, # NA22G add-on for the NV 2.0 and # BA02B for the NV 2.0 Base, and both racks have very similar specs.

The NV 2.0 # NV22G does include,as you stated, the bike repair stand. The # NV22G, when installed in the hitch, will sit closer to your vehicle when folded down then the NV 2.0 Base bike rack.

Both racks would be excellent choices for a platform style bike rack. Of the two, I like the NV 2.0 Base model because of this bike rack's economical price over the Kuat # NV22G.

expert reply by: Jared P

0

Dan S.

4/7/2020

I am looking for a light weight two bike rack for my truck and cars Mazda3 Vibe GTThe truck is a 1500 ram 2014 with a 2 hitch.The truck is the go to vehicle now and I dont see using the small cars for hauling the bikes.Is a swing away a better choice rack for this application and the Kuat Nv 2.0 with the bike stand for a car?

Reply

Chris R.

4/10/2020

If lowering the tailgate (without removing the rack) is a must, going with a swing-away rack is definitely the best option. If you really like the Kuat NV 2.0 # NV22G though, what you could do is simply add the Kuat Swing Adapter # PVP20B. This will essentially convert it to a swing-away design, allowing you to push the rack and bikes to the side of the truck for tailgate clearance.

Reply

Answer 1

On the Kuat NV 2.0 Base 2-Bike Platform Rack #BA22B the horizontal distance from the hitch pin hole to the center of the nearest bike rail is approximately 14-3/8-inches. The height of the unloaded rack when folded down is 11-7/8-inches relative to…

view full answer...

Answer 2

The Kuat NV 2.0 #NV22B measures 55-1/8 inches wide overall, folded or unfolded. The height when folded is 25-3/4 inches. When unfolded it is approximately 13 inches tall. When unfolded the rack is 37-3/8 inches front to back. When folded up it is…

view full answer...

Answer 3

I do have some information that will give you an idea of how much clearance you will have between the Kuat NV 2.0 Bike Rack, #NV22G-NA22G, and your 2011 Nissan Rogue, however, I do not currently have a Rogue on my lot to make a test fit video. As…

view full answer...

Answer 4

There use to be an adapter number 016-025-00-00 but it has since been discontinued and there is not a replacement expected. I am sorry that I could not be more helpful.

view full answer...

Answer 5

I have a solution for you but the Hollywood Racks Destination Bike Rack #HR4000 will most likely not be able to fold up on your 2010 Toyota Rav-4. Most of the hitches available have a clearance of around 7" between the center of the hitch pin…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

What's the Difference Between the Kuat NV 2.0 2-Bike Rack and the Kuat NV 2.0 Base Bike Rake

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching