Childrens Bike Adapter for Kuat NV 2.0 Platform Rack

Question

Question:

i have the kuat basic my sons BMX will not fit...I was told it would with the adapter however I do not see it on your website

asked by: Vinson

0

Expert Reply:

There use to be an adapter number 016-025-00-00 but it has since been discontinued and there is not a replacement expected. I am sorry that I could not be more helpful.

expert reply by: Erik B

0

click to enlarge

Answer 1

The frame of the Kuat Transfer V2 Bike Rack #KU24FR has specific holes in it for the arm pucks so that starting bike position will need to face the passenger side of your vehicle. I've attached a clip from the instructions showing what…

view full answer...

Answer 2

If anything a non-supported load like a bike rack would be more stressful than the tongue weight of a trailer so you'd not be able to exceed the 150 lb tongue weight rating of your 2009 Honda CR-V with the weight of a bike rack.…

view full answer...

Answer 3

There are only certain bike carriers that can be used at the back of an RV. And since you are looking for a platform style and want to carry at least 3 bikes there are 2 options. We have the RockyMounts SplitRail, #RKY11404-3, and the RockyMounts…

view full answer...

Answer 4

The Inno Tire Hold #INH142 4-bike rack will accommodate children't bikes with 20 inch wheels or adult bikes with up to 29 inch wheels. Inno tells me that a 33 inch wheelbase bike will just fit on the rack. The Kuat NV 2.0 4-bike, part…

view full answer...

Answer 5

On the Kuat NV, #NV22G, when no bikes are on it and you have the arms folded down it measures 13-1/8 inches from the center of the hitch opening to the top most part of the rack. But if you have the arms folded down and also tilt the rack down it…

view full answer...

Answer 6

Hello Jason, I just looked up those Finn Golf Scooters those things are pretty sweet. We do have a potential solution for carrying a Finn Golf Scooter, but there are no Thule products I am aware of that will work for this. Your best option for this…

view full answer...

Answer 7

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You can have your bikes loaded up and still tilt the Kuat NV 2.0 Base 2-Bike Platform Rack - 1-1/4" Hitches #BA12B. I couldn't find where it said in the specs it could not be in the tilted position so I checked with Kuat and as you can see…

view full answer...

Answer 10

50". I checked with Kuat and the NV 2.0 Base Bike Rack for 4 Bikes item #BA22B-BA02B works with bikes having up to a 50" wheelbase.

view full answer...

Answer 11

Thanks for the picture! No, it won't. Since that rack is on the back tire on your Verve 2 E-Bike you shouldn't have any issues using the Kuat Transfer V2 Bike Rack item #KU84FR. You will want to stop the clamp short of that fender on your…

view full answer...

Answer 12

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Childrens Bike Adapter for Kuat NV 2.0 Platform Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching