5th Wheel Trailer Hitch Custom Installation Kit # 50043-6008 Fit For 2002 Ford F-350 Dually

Question

Question:

F 350 2002 dulley 8foot bed. Will the 50043-6008 fit?

asked by: Dave

0

Expert Reply:

The Reese Fifth Wheel Trailer Hitch Custom Installation Kit with Brackets and Rails - Ford Super Duty 1999-04, # 50043-6008, you referenced is a confirmed fit for your 2002 Ford F-350 Dually. The 2002 Ford F-250 and F-350 Super Duty Reese Quick-Install Custom Base Rails and Installation Kit for 5th Wheel Trailer Hitches, # RP50082-58 are also a confirmed fit for your vehicle.

expert reply by: Jason S

0

Answer 1

Part #50043-6008 is compatible with all the Reese hitches except for the Signature Series, which uses a different rail system.

view full answer...

Answer 2

Yes, the forward most holes in the bed rails in the #50043-6008 kit would just have bolts installed through the bed material and the hat channel underneath. They do not attach directly to the frame brackets. This is definitely strong enough for the…

view full answer...

Answer 3

The 4th bolt on each side of the bed bolts to the bed material and the hat channel underneath. The hat channel runs across both sides of the frame to support the bed. I have included a link to the instruction file for these brackets so you can get an…

view full answer...

Answer 4

The correct Reese custom brackets for your 2008 Ford F-250 are Custom Brackets, #RP50082. These brackets do not require any drilling to install and are designed to work with the Reese Universal Base Rails, #RP58058, and Draw-Tite Universal Base…

view full answer...

Answer 5

Yes! I can tell by the picture you have provided that the rails are industry standard, 10-bolt rails and the brackets, #50043, will fit them and your 2003 Ford F-250. I have included a link to the installation instructions for you.

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

5th Wheel Trailer Hitch Custom Installation Kit # 50043-6008 Fit For 2002 Ford F-350 Dually

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching