Compatible Trailer Hitch Receiver to Fit 2017 Honda Civic Hatchback
Question:
So you have a Trailer hitch receiver that will definitely fit the new 2017 civic hatch ex model. I checked earlier and there were none available. I holding off purchasing an new civic until Im sure one is available.
asked by: Randy G
Expert Reply:
The Curt # C11463 has been confirmed to fit the new 2017 Honda Civic, both the coupe and hatchback. This is a Class I hitch receiver rated for 200 pounds max tongue weight and 2,000 pounds max towing weight. Also, according to Curt's warranty, a support strap, like part # 18050, must be used to secure any non-trailer loads like a bike rack or cargo carrier.
If you plan to tow a trailer with your Civic the wiring harness for the hatchback is part # C59236. This is a universal harness but will give you a 4-way trailer connector to power the trailer's lights.
For a ball mount, the Curt # C45521 will give you a rise of 2-5/8 inches or a drop of 3-1/4 inches. Then for a 2 inch hitch ball use # A-82 and for a 1-7/8 inch ball use # A-80. Finally, for a pin and clip you can use # F-4.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Concealed Trailer Hitches For a 2018 Honda Civic Sedan
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Does the Yakima Hold-Up 2 and Yakima Two-Timer use the same tongue assembly?
- Q&A: Is Curt Class IV 2 Inch Hitch # 14001 the Correct Width to Fit the Frame Rails on 1983 Ford F-100
- Q&A: How to Upgrade Trailer with 45 MPH Speed Rating for Highway Speeds
- Q&A: Recommended Trailer Wiring Harness For 2016 Honda Civic Sedan
- Q&A: Recommended Hitch and Hitch Expander for a 2018 Honda Civic Sedan
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Rust Prevention
- Article: Trailer Hitch Receiver Sizes
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Things to Know About Weight Distribution Hitches