Can a Brake Controller Be Installed in a 2007 International 4200
Question:
I have a 26foot box truck that is a 2007 international 4200 I am interested in installing a brake controller and was told it has to be tied into the computer I was wondering if you can tell me anything so I dont get ripped off!
asked by: Thomas W
Expert Reply:
A brake controller does not have to be tied into the computer on your 2007 International 4200. A brake controller such as # 90885 requires 12 volt power in to power the controller, a ground which is usually attached to the negative battery terminal, an output wire (blue) goes to the trailer connector, and a connection to the cold side of the brake switch to tell the controller when you are stepping on the brake pedal.
If your truck has air brakes then it is possible that there isn't a brake switch wire that you can tap into. In that scenario you could use any dedicated brake light only circuit such as a CHMSL or stop light fuse.
You will also need a 30 amp circuit breaker that will be installed in line with the power wire to the controller. The controller black wire will connect to the positive battery terminal via the circuit breaker. For additional wire and circuit breakers you can use wiring kit # 5506.
I have included some links that will help with the installation. Not all of it applies to your situation so just follow the relevant parts.
Products Referenced in This Question
Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Pollak Circuit Breaker - Cycling/Automatic Reset - 30 Amp - Straight Mount Bracket
- Accessories and Parts
- Wiring
- Circuit Breaker
- 30 Amp
- Pollak
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Buyers Products 15 Ton Combination Pintle Hitch w/ 2-5/16" Ball
- Q&A: Recommended Trailer Brake Controller For 2007 International Trucks 4100 Dump Truck
- Shop: Brake Controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: Curt Echo Full Review
- Search Results: aluminum wheel
- Search Results: 14" aluminum wheel
- Shop: Aluminum Hi-Spec Series 06 Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - Silver
- Search Results: spare tire mount
- Shop: Dexstar Steel Spoke Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - White Powder Coat
- Shop: Rack'Em Spare Tire Mount for E Track
- Shop: Replacement Base for B&W Companion Flatbed 5th Wheel Trailer Hitch - 25,000 lbs
- Shop: Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Ford Super Duty
- Q&A: Wiring Diagram for Dexter DX Series Electric Over Hydraulic Brake Actuator
- Q&A: Finding Brake Light Switch On 2007 International 4400 Series Truck with Air Brakes
- Q&A: Will Prodigy P3 Trailer Brake Controller Work on Truck With Air Brakes
- Q&A: Locating Brake Light Switch on 2005 International 8600 Truck
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: How to Install a 7-way and 4-way # HM40975 on a Vehicle with a 4-Way Round
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: trailer brake controller
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: brake controller
- Video: Choosing the Right Brake Controller
- Search Results: trailer hitch
- Article: Trailer Tire Sizing
- Search Results: hitch
on Trailer Brake Controller
