Do Tow Hooks have to be Removed to Install Westin HDX Grille Guard on a 2016 Ram 3500

Question

Question:

Do you get to keep your factory tow hooks with install??

asked by: Frank

0

Expert Reply:

The tow hooks will remain on your 2016 Ram 2500 when installing Westin HDX grille guard # 57-3550. I have included a picture that shows the guard installed and you can see the tow hooks still in place.

expert reply by: Michael H

0

click to enlarge

Answer 1

There is minor trimming required on the lower valance for the bottom brackets on a 2010 Dodge Ram 2500. However since it is the lower valance and the view of it would be blocked by the grille guard anyway the trimming should not be noticeable. I…

view full answer...

Answer 2

Assuming you have the Westin HDX #57-3550 or #57-3555 Grille Guard, you'll need the #57-355PK replacement hardware kit. I looked up the vehicle fits, and the 2018 Ram 3500 and the 2014 2500 use the same HDX Grille Guards. Keep in mind that…

view full answer...

Answer 3

To install the Westin HDX Grille Guard with Punch Plate - Black Powder Coated Steel #57-3555 you purchased on your 2018 Ram 2500 you will need the Replacement Hardware Kit for Westin HDX Grille Guards 57-3550 and 57-3555 #57-355PK which includes…

view full answer...

Answer 4

I checked with Westin and you can permanently retain the use of the tow hooks of your 2013 Ram 2500 to install the Westin HDX Grille Guard with Punch Plate #57-3555.

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 7

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 8

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

I can definitely help you find the correct replacement hub and bearings for your Dexter P-12 SLR axle, but since part of the serial number was unreadable you will need to take a few simple steps to identify which bearings your axle uses. The easiest…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Do Tow Hooks have to be Removed to Install Westin HDX Grille Guard on a 2016 Ram 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching