Hopkins Graduated RV Levels Review Video

The Edge Pulsar programmer and monitor part #EP54KR can give you up to an additional 136 horsepower and 291 ft lbs of torque.

There really isn't going to be a "typical" size for an oval exterior light, but if your light is overall 4.33" long and has 3.75" between the mounting holes then this light will work for you.

I see what you mean about the cover being "recessed" into the front of the trailer. After looking thru a few pictures of these 2005 Trail Lite Hybrid trailers, it appears to be a fairly unique tank cover. I am sorry to say that we do not…

Tthe etrailer.com Electric Jack w/ Footplate #EJ-3520-BBX that you referenced has a 30 amp barrel fuse like #EJ-FUSE which is located in a flared opening right where the black power wire comes out of the motor housing. It is very easy to access and…

There really isn't a difference between the intent and purpose of the Ultra-Fab Ultra Scissor Jack #UF48-979006 and the Lippert Scissor Stabilizer Jacks #LC285326. One just has the word Stabilizer in the title and the other does not. Both will…

I have a solution for you, but the Optronics LED RV Exterior Scene Light #UCL41CB is designed to work on 12v power only, so it's not going to work on a 110v/120v feed. Unfortunately all of the lights we've got for this application are going…

Sounds like the screw or the motor of the Lippert Smart Jack #LC643589 is damaged or has an internal issue. The switch is obviously working and the motor works in the harder direction so something funny is wrong with it. If it's within a year old…

On the Hopkins Graduated RV Levels, #HM08525, the level C is for front-to-rear level and can be installed on either side of the vehicle. The level 3 is for side-to-side level and can be installed on front or rear of the vehicle. Read both levels (C…

If you check out the picture I attached you'll see the mounting holes and dimensions for the Optronics LED RV Exterior Light #UCL41CB.

The Hopkins Graduated RV Levels #HM08525 can be mounted either with their self-sticking adhesive backs or by use of screws for semi-permanent installation. Since the self-sticking backs do not adhere to the faux leather fabric in your motor home you…

I do have an option for you but the Camco AccuLevel Trailer Bubble Level part #CAM25563 does not come with brackets or hardware to install. I recommend Wheel Masters Level Master Trailer Bubble Level with 5th Wheel Pin Box Mounting Bracket part…

The Snap Pad Jack Pad for Camper Jacks w/5-1/2" Round Feet Item #SN97FR is going to be too big to snap on to your 5.278" foot. What you can do instead is use the Stromberg Carlson RV Jack Pads for RVs and Trailers - 9" Long x 6"…