What Voltage Drill Should be Used with Trailer Valet 5x

Question

Question:

For the Trailer Valet 5X, to use a drill instead of the crank handle, what size voltage drill do you recommend ?

asked by: Tom Z

0

Expert Reply:

18 volt drills would be the best as they are quick and strong. But realistically a 12 volt powered drill would work too with the 5x part # STC-V211. The drill attachment needed is the part # TVDA.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact at Trailer Valet regarding the XL Trailer Dolly #TVXL2 that you referenced. He stated that they do not recommend using an impact driver with the drill attachment. Doing this will simply emit too much torque for the socket to…

view full answer...

Answer 2

I spoke to my contact at Trailer Valet and they informed me that the problem you are experiencing can normally be attributed to one of three different situations. The first thing you will need to do to ensure the dolly does not tilt while in motion…

view full answer...

Answer 3

The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option part #TV94FR as you mentioned does not come with hardware, most customers just use the hardware from the existing jack. That said, I don't have any exact hardware…

view full answer...

Answer 4

The Trailer Valet #TV94FR has a 3000 lb lift capacity, so it'll handle a 1000 lb tongue weight easily. Trailer Valet doesn't recommend using an impact driver because the increased torque they deliver could dramatically shorten the…

view full answer...

Answer 5

I went to the warehouse and checked out the Replacement Drill Attachment for Trailer Valet XL Trailer Dolly, part #TVDA for you. The adapter will work best with 1/2 inch 18V drills. This adapter will work with #TVXL2 and #TVXL25 and also the…

view full answer...

Answer 6

Hi Bill, The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 has a tongue weight range of 200lbs - 450lbs so you'd be right around the middle of the capacity when loaded, making this a great choice. This doesn't…

view full answer...

Answer 7

To connect the reverse wire from the Tekonsha OEM Replacement Vehicle Wiring Harness #TK57VR to your 2022 Toyota Highlander you'll need to route it up the paneling at the back of your Highlander, through the boot that connects from your…

view full answer...

What Voltage Drill Should be Used with Trailer Valet 5x

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching