Valet XL Trailer Dolly Part # TVXL25 Tilting While in Motion

Question

Question:

I have a trailer that weights about 8000lbs, tongue weight is about 850lbs. Every time I move the trailer with the valet xl the dolly starts to tilt and gets out of position. I follow the instructions on how to mount it and tighten the collar to its maximum. I also saw the videos from the valet xl on how to connect it. Any suggestions?

asked by: Noe

0

Expert Reply:

I spoke to my contact at Trailer Valet and they informed me that the problem you are experiencing can normally be attributed to one of three different situations. The first thing you will need to do to ensure the dolly does not tilt while in motion would be to ensure that you have the proper size hitch ball that matches the coupler you have on your trailer. The Trailer Valet XL Trailer Dolly part # TVXL25 comes with a 2-5/16" hitch ball but if you have a 2" trailer coupler you will need to replace the 2-5/16" hitch ball with a 2" hitch ball part # TVHB2.

Another possible cause that the dolly is tilting could be attributed to collar not being tightened enough. Per the instructions, you will want to use the tightening tool and turn the locking nut counterclockwise until the nut is securely flat against the coupler.

The other possible reason as to why the dolly is tilting while in use would be associated with the parts not being installed correctly. I have emailed you a copy of the installation manual in addition to an install video of the dolly which you will want to take a look at. If none of the above steps fix your problem please let me know and I would be glad to provide additional advice.

expert reply by: Conner L

0

Answer 1

The Trailer Valet XL Trailer Dolly part #TVXL25 should work for you. It has a tongue weight capacity of 1,000 lbs so your 6,000 lb trailer won't be an issue and the hitch ball connection will allow for 90 degree turns. The only issue would be the…

view full answer...

Answer 2

In regards to the Trailer Valet XL Trailer Dolly part #TVXL25, the angle of the attachment point combined with the gear drive system is what stops the jack from simply falling down. The angle of attachment applies a downward vertical force on the…

view full answer...

Answer 3

The Trailer Valet V2 Trailer Dolly with Chain Drive - 2" and 2-5/16" Hitch Ball TVXLV2 has been discontinued by the manufacturer. It did come with the 9 inch solid tires, the stabilizer bracket, and the coupling plate. The Trailer Valet XL…

view full answer...

Answer 4

We do have one option for a roll-up tonneau cover we know will work for your 2020 Ford F-250 Super Duty short bed which is completely compatible with the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43003XT-785. What you will need is the BAK…

view full answer...

Answer 5

Usually ladder racks use the inside edge of the top of the bed site to attach to the vehicle, but luckily there are exceptions to that. The Thule TracRac SR is typically compatible with tonneau covers that mount to the inside edges of the truck bed.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Hey Buddy, so the Fastway Adjustable Ball Mount part #DTSTBM6825-2S is a really great choice for the 2-1/2 inch hitch of your 2021 Ford F-250 which is going to be very solid in your hitch due to it's built in anti-rattle device that is easy to…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...