Vent Cover Recommendation for Fan-Tastic Roof Vents

Question

Question:

Will this unit mount over a FanTastic fan? Is there a Maxxair FanMate 2 available specifically for use with the FanTastic fan?

asked by: Jim S

0

Expert Reply:

For Fan-Tastic roof vents the correct cover is actually the part # DMC38FR. This is the vent cover designed to fit the Fan-Tastic roof vents as well as other brands as well.

expert reply by: Jameson C

0

Answer 1

The best roof vents we offer for your trailer are going to be the MaxxAir FanMate RV and Trailer Roof Vent Covers part #MA00-955002 for black, part #MA00-955003 for smoke, or part #MA00-955001 for white. The reason for this is because they have the…

view full answer...

Answer 2

Yes, the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip In White #MA76JR, Black #MA86JR and Smoke #MA26JR will attach to the mounting tabs already found on MaxxFan and MaxxFan Plus roof vents. You may not be able to fully open the roof vent with…

view full answer...

Answer 3

If you have a high powered/high speed Maxxfan, then you would use the MaxxAir FanMate RV and Trailer Roof Vent Cover - 25" x 18-1/8" x 10-1/4" - Black #MA00-955002, Smoke #MA00-955003, or White #MA00-955001.

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Vent Cover Recommendation for Fan-Tastic Roof Vents

Product Page this Question was Asked From

Continue Researching