Replacement Fender Brackets For Trailer With 12 Inch Wheels.

Question

Question:

Hello, I have a folding trailer manufactured by Changzhou Nanixiasu Tool Co and am in need to a new fender bracket. Can you help me with that? What other information do you need. The trailer has 12 inch wheels. Thanks

asked by: Jason H

0

Expert Reply:

For a trailer with 12 inch wheels, I suggest using the Mounting Brackets for Trailer Fender - 8"-12" Wheel, # CE26061G-2. These brackets are galvanized to resist corrosion and rust. These brackets mount to the trailer frame and the fender. They are sturdy 3/16 Inch thick and measure 6 inches wide and 5-1/4 inches tall. I've attached a review video for you along with an installation video. Two brackets are required per fender. These are a universal application so the specific fit will vary. I looked up your trailer and it appears, at least from the pictures I found, this will meet your needs.

expert reply by: Jason S

0

Answer 1

The mounting bracket on the Fulton Single Speed Trailer Winch #F142002 is 3-5/8" wide, so it's going to be fairly close to your original bracket.

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 5

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda 205/65-10…

view full answer...

Answer 8

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 9

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

On Dexter 12" Nev-R-Adjust Electric Brake Assembly #23-458 the shoe pad thickness is 3/16 of an inch. Dexter says that you should replace the shoes if the material gets down to 1/16 of an inch thick or less.

view full answer...