Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
Question:
I need two trailer hubs. 4 bolt on 4. L44643 bearings inner and outer.1.250 seal ID 4.135 measured thru the bore. 1/2inch studs. Hub OD is 5.225. The trailer is rated at 1000 pounds. It was made by Housee Miller model HM506. Do you have a recommendation? Thank you
asked by: Mike H
0
Expert Reply:
The trailer hub part # AKIHUB-440-2-1K matches exactly what you would need. Bearings, bolt pattern and stud dimensions are the exact same.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Single Axle Trailer Fender w/ Backing Plate - Steel - 13" to 14" Wheels - Qty 1
- Search Results: trailer leaf springs
- Search Results: trailer springs
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Video: Review of etrailer 3 Leaf Slipper Spring - e49SR
- Q&A: Trailer Grease Seal Recommendation for Replacement of Victor 47376
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Shop: 1-1/2" Square Trailer U-Bolts (Qty 2)
- Search Results: 4 lug axle
- Video: Review of etrailer by AxleTek Trailer Axles - 2,000 lb 72 Inch Long Axle with Idler Hubs - e62YR
- Video: Review of etrailer Trailer Fenders - Single Axle Fender - HP46VR
- Video: Review of HE Parmer Trailer Fenders - Steel Fender with Backing for 13-14 Inch Wheels - HP79VR
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-EZ-1K Review
- Video: etrailer Trailer Idler Hub Assembly Review AKIHUB-440-2-1K
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-1K Review
- Search Results: hub nuts
- Search Results: 34823 seal
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Trailer Tire Sizing
- Q&A: Trailer Hubs for Old Boat Trailer with 1 Inch Diameter Spindles
- Search Results: l44643
- Search Results: grease
- Q&A: How is a 4 on 4 Inch Wheel Bolt Pattern Measured
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: Pre-Greased Hub Assembly With L44643 Hub Bearings
- Q&A: Is There Difference Between etrailer.com and Dexter Hubs that Fit 1 inch Spindle
- Article: Trailer Jacks