What Does the # SH44VR Look Like When Installed on a BMW Sport Wagon

Question

Question:

How much is the assembly is actually visible after its installed? How much fascia trimming is there? Thanks much.

asked by: Mike

0

Expert Reply:

While the installation of the Stealth Trailer Hitch, item # SH44VR on the 2009 BMW 3 Series Sport Wagon is quite involved, it does not require any fascia trimming. For installation, it requires temporary removal of bumper/fascia and permanent removal of the impact structure. The hitch then replaces the impact structure for support and safety. Once installed, the hitch is completely invisible when not in use. The # SH44VR is not meant for towing. If you want to tow a light trailer, you would instead want the # SH88VR which is upgraded to include the wiring and ballmount needed for towing.

expert reply by: Robert G

0

click to enlarge

Answer 1

For the 2007 BMW 328i Wagon then the only hitches available are the Stealth Trailer Hitch Receivers #SH44VR or the #SH88VR. These hitches also work for the 2007 BMW 328i Wagon, the 335i Coupe, and the 335i Sedan.

view full answer...

Answer 2

First, the Curt Trailer Hitch, #C11702, is designed to fit the following vehicles: 1989 - 1990 BMW 3 Series Convertible 1984 - 1986 BMW 3 Series Sedan and Coupe, except M3 1987 - 1988 BMW 3 Series Sedan, Coupe and Convertible, except M3 If your 325…

view full answer...

Answer 3

We do offer a receiver hitch for the 2007 BMW 328Xi coupe, the Stealth Hitch #SH44VR. The Stealth Hitch features a detachable receiver tube that is removable. Once the receiver is removed, the hitch is completely invisible unless you're on the…

view full answer...

Answer 4

The Stealth Trailer Hitch, #SH44VR and the #SH88VR, will fit the 2010 and 2011 BMW 328i wagons but not the 328xi wagons of either year. If you intend to tow at any point, you would choose the #SH88VR, it includes the ballmount, ball and wiring needed…

view full answer...

Answer 5

The Stealth Trailer Hitch Receiver will fit both the 2007 BMW 328i Sports wagon and the 328xi Sports Wagon. It is a class 3 receiver that has a 2" opening. It has a 350 pound tongue weight capacity which would include the weight of the carrier…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

What Does the # SH44VR Look Like When Installed on a BMW Sport Wagon

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching