Repair Kit for Lead Leg on Venture Landing Gear

Question

Question:

Will this repair kit work in my VM900L-209974 lead leg?

asked by: Brian C

0

Expert Reply:

Repair kit # LG-146060 fits the follower leg on a Venture landing gear set like yours. For the lead leg you will need # LC146059.

expert reply by: Michael H

0

Answer 1

It is possible to replace just one leg of your 5th wheel landing gear. You will just need to confirm if it is the lead/driver leg or the follow leg. Usually the lead leg is on the driver side and the follow leg is on the passenger side. You'll…

view full answer...

Answer 2

The landing gear looks like a standard set based on the pictures and the dimensions you listed. The part #LC146060 would be what you need for the follow leg and then part #LC146059 for the lead leg.

view full answer...

Answer 3

Yes, I attached a diagram you can use to install the #LC146059 that you referenced.

view full answer...

Answer 4

The #LC142178 is the motor, which tells us that you do have a Lippert/Venture landing gear so you would need the Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear #LC146059 if the gears in your lead leg (driver's side) are worn…

view full answer...

Answer 5

To find the correct replacement gearbox for your landing gear I would need to know the model of your landing gear. For example, the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies #LC276602 you were looking at…

view full answer...

Answer 6

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 7

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 8

Since you have a Dometic AC unit the best option to replace it from Advent would be the part #ACDOM135 which was designed for this exact situation and would allow you an easy install since the electronics would plug right in.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 11

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.

view full answer...

Answer 12

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Repair Kit for Lead Leg on Venture Landing Gear

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching