Recommended 7-Way Trailer Connector For 2017 Chrysler Pacifica

Question

Question:

The T-one wiring kit 118723 that I purchased is installed. My Chrysler dealer installed same. They had also installed a factory receiver on my 2017 Pacific. The flat plug for the wiring kit 118723 is under the 2x2 inch part of the receiver. At 80 it is difficult to connect the trailer to said vehicle !! I want to purchase a male seven spade connector that I can mount to the receiver. There is an opening on the passenger side of the factory receiver to do this. I see that you have listed many adapters to do this. What do you suggest?

asked by: Jud P

0

Expert Reply:

To install a 7-way connector on your 2017 Pacifica you will need part # ETBC7. This plugs into the 4-way connector on the back of your vehicle.

Additional wires need to be run from the # ETBC7 as shown in the attached drawing. You can cap the wires you do not need to use. The kit does include a mounting bracket for the wiring connector you can use. If you do not want to drill holes to mount the trailer harness you can use the no-drill bracket like part # 18140.

If you need the 7-way connector because you are using a brake controller you can use the wiring diagram I provided to see how the wires are run for a brake controller as well. If you need a brake controller I recommend part # 90885. This is our most popular because it is easy to install and operate.

expert reply by: Jeffrey L

0

click to enlarge

Answer 1

I spoke with Tekonsha who is one of the leading brake controller manufacturers and they stated that you should have no problems installing a brake controller on your 2017 Chrysler Pacifica with start/stop technology. All of the electronics within the…

view full answer...

Answer 2

The 12 volt auxiliary power connections are great for charging a smart phone or running an auxiliary accessory like a DVD player, but these circuits do not have the capability of charging an auto or marine style 12 volt battery. The auxiliary may be…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 8

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 9

Yes you can.

view full answer...

Recommended 7-Way Trailer Connector For 2017 Chrysler Pacifica

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching