Erickson Tie Down Anchors - Trailer Tie-Down Anchors - 59131 Review Video

The warranty for the Andersen Rapid Hitch Adjustable, Aluminum Ball Mount Kit #AM3405 is one year. If you purchase this item from us the warranty will be upheld by etrailer.com as well as Andersen. We are an authorized dealer for the Andersen…

It sounds like you will be running screws through both wood and metal to install the etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 94" Long - Qty 4 #e62VR. I would look for some wood-to-metal screws at the local hardware store to…

I can't confirm US Cargo Control as this is not a brand we carry but the e-track fittings are fairly standardized so you should be able to use any brand designed for e-tracks such as the Erickson E-Track Tie Down Ring part #59131 with the…

We have a few options for your coupler with a 4-1/2" lip. The etrailer Trailer Coupler Lock #e98895 is a good lock. From there we move up to the better Trimax Dual Purpose Coupler Lock #TMX67FR which uses a hardened steel construction. The…

Great question! The AMPLock Trailer Coupler Lock #AMP44FR works for couplers that connect to a 2-5/16" hitch ball and the coupler has a flat lip design. This is pretty standard for trailer couplers but I'm also linking a review video of this…

We have the Sportrack Kayak Carrier #SR5511 available that can fit crossbars that are 1-1/2 inch square like what you have so this would be a great solution. It's a J-style carrier which is easier to load from the side. We don't have any…

While the Trimax Heavy Duty Adjustable Wheel Lock with Padlock #TMX42ZR will help prevent theft and likely keep your trailer from moving too much, this shouldn't be relied upon as a chock - for that you'd want something like the Trimax Wheel…

Yes the E-track accessories like the Tie Down Ring #59131 do fit in the BoxLink cleats in the bed of Ford trucks like your 2018 F-350.

The Zinc Sheet Metal Screw - 8 x 3/4" Indented Hex Washer Head - Hex Slotted Drive #31071 are a good choice for your wall studs, but not for your 3/4 inch wood floors. The zinc coating on both the E-track #E19148 and the screws will prevent…

Curt hitch ball #40038 has a 1 inch diameter shank. For Curt balls with 3/4 or 1 inch diameter shanks you would use wrench #C20001. The nut on that ball should use the 1-1/2 inch end of the wrench. You could also use a large crescent wrench if you…

For an LED license plate lamp like part #LPL41CB, the black wire is connected to the running light circuit so that the plate is illuminated when the vehicle head lights are turned on, and the white wire is connected to ground.

I went and pulled both the part #59131 and #59147 from our warehouse to get the dimensions you requested. The width of both measures 7/16 inch. The overall length of the part #59131 where it clips down into the e-track is 2-13/16 inches. That portion…