Adjusting a Weight Distribution System for Best Performance
Question:
How do I adjust the weight distribution hitch to only allow 1/2 mine goes down about 4 now and I just learned that that is incorrect do I shorten the chain or lengthen the chain? Thanks
asked by: Terry B
Expert Reply:
The Reese Weight Distribution System, # RP66022, has several points of adjustability depending on your application. The head unit can be tilted toward or away from the trailer which will raise or lower the spring bars. The head can also be adjust vertically and the spring bar chains can be adjusted. What you are looking for is a level trailer with the spring bars parallel with the trailer frame or pointed down slightly. Ideally, you will want 5 chain links between the spring bars and hanger brackets.
This requires some trial and error to find just the right setting for your application. I have included a link to the installation details below that explain setting up the system. I have also included some videos below that show a weight distribution system being set up/adjusted, and an FAQ article on weight distribution.
Product Page this Question was Asked From
Reese Weight Distribution w/out Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: B&W Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Shop: BOLT brand vehicle and hitch locks
- Shop: BOLT Trailer Hitch Receiver Lock - 2", 2-1/2", and 3" Hitches - Ford Side-Cut Key
- Q&A: What is the Difference Between Trunnion and Round Bar Weight Distribution Systems
- Video: Curt Hitch Adapters - Hitch Reducer - C45405 Review
- Video: B and W Hitch Receiver Reducer Sleeve Review BWRHXA2182
- Video: Curt Hitch Receiver Reducer Sleeve Review
- Shop: Pro Series Weight Distribution Shank - 14" Long - 4-3/4" or 6-1/2" Drop - 1.5K TW
- Shop: Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Search Results: hitch reducer
- Search Results: hitch receiver reducer
- Search Results: locking hitch pin class v
- Search Results: 2.5 to 2 hitch adapter
- Search Results: 2 to 2.5 hitch adapter
- Shop: etrailer Hitch Receiver and Coupler Lock Set - 2" Hitch - 1/2" Coupler Latch - Keyed Alike
- Shop: Curt Trailer Hitch Receiver Lock - 2" and 2-1/2" Hitches - Stainless Steel
- Search Results: coupler lock
- Search Results: hitch receiver lock
- Shop: Truck Bed Sliding Tray
- Shop: BedSlide Heavy-Duty Sliding Truck Bed Tray w/ T-Tracks - 5" Rails - 2,000 lbs - Black
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Video: Choosing the Right Brake Controller
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Suspension Enhancement