Distance from Ball Mount Platform to Top of Hitch Opening on Curt Multi Ball Mount D210

Question

Question:

On the MT70066 dual hitch the height from the bottom to the top is 9 1/4inch blue arrow on oft most of picture attached Hat is the equivalent measurement in the curt hitch?

asked by: Yanni

0

Expert Reply:

From the top of the ball mount platform to the top of the upper hitch opening of the Curt Multi-Purpose ball mount # D210 measures 7-13/16 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

When using the Brophy Hitch Extender with Step - 2" Hitches - 18" Long - 6-1/2" x 17" Platform #ST18 it will reduce your hitch's capacity by 1/3, so if you've got a 1200-lbs max tongue weight capacity on your hitch it will…

view full answer...

Answer 2

Installing a Rhino Rack gutter mount roof rack system on your 2022 Jeep Wrangler Unlimited will give you 88 pounds of carrying capacity. The Vortex Aero Crossbars #RRVA150B-2 will give you 59" of usable space as well. To complete this set up,…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Distance from Ball Mount Platform to Top of Hitch Opening on Curt Multi Ball Mount D210

Product Page this Question was Asked From

Continue Researching