What Adapter is Needed to Install Thule Xsporter Pro on a 2016 Toyota Tacoma

Question

Question:

Will this work if I remove the factory installed tonneau cover

asked by: Charles A

0

Expert Reply:

If you are wanting to install the Thule Xsporter Pro on your 2016 Toyota Tacoma the correct part number is # TH500XT-XK4.

The # THXK3 you referenced is for the older Tacomas. For your 2016 Tacoma the included adapter is the part # THXK4 which is what your truck would need.

The tonneau of your truck would need to come off too since the rack wraps around the inside of the bed rail which is where you tonneau would attach.

expert reply by: Jameson C

0

Answer 1

We do have a mount kit designed for the Thule TracONE ladder racks and your 2019 Toyota Tacoma with the part #THXK4B. The ladder rack part number for your truck that includes the mount kit and the uprights we have the part #TH27000XTB-XK4B.

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Hey Shannon, thanks for reaching out! Sounds like you're looking for the Thule Xsporter Pro #TH500XTB-THXK3 for your 2008 Toyota Tacoma with the Deck Rail System. This is adjustable up and down as well as along the Deck Rail System so you get the…

view full answer...

Answer 4

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 5

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 6

The only thing you will need to use the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack on your 2017 Toyota Tacoma is the Thule Xsporter Pro and TracONE Ladder Rack Adapter Kit for Toyota Tacoma part #THXK4 or part #THXK4B.

view full answer...

Answer 7

I went ahead and brought the issue to my contact at Thule, and he said to either use WD-40 to spray on the available threading and use a pair of pliers to grab onto the T-Bolt while you try to rotate the knob. This will allow you to have extra…

view full answer...

Answer 8

The good news is that the roof rack manufacturers all decided to use the same channel dimensions so the roof rack accessories for roof channels basically all are interchangeable between (most) brands. Thule and Rhino Rack do work together just fine.…

view full answer...

Answer 9

The Toyota Tacoma Mounting Kit #THXK3 is designed to mount the Xsporter Pro #TH500XT. I spoke with Thule to see if it is compatible with older models of the Xsporter, and they do not guarantee the #THXK3 will work with older models of the Xsporter.…

view full answer...

Answer 10

The Thule Xsporter, part #TH500XTB, can have its crossbars removed from the bases, leaving them installed and the bases clamped to the bedrails. I wouldn't recommend doing so, as you can also just remove the base's clamps and uninstall the…

view full answer...

Answer 11

I spoke with a representative of Thule, who told me that they did not classify the 450 lb weight capacity of the Thule XSporter #TH500XT as either static or dynamic and that you only needed to have a capacity of less than 450 lbs and you would be…

view full answer...