Parts Needed for Over Under Axle Kit on 1-3/4 inch Diameter Axle

Question

Question:

will this kit work with a 1 3/4inch axle? what kit will work for a 2,000 lb 1 3/4inch axle?

asked by: Jay

0

Expert Reply:

I can help you piece together an over under kit that will fit a 1-3/4 inch axle, but the part # K71-384-00 is not a fit for you as it is designed for thicker axles.

You would instead want the spring seat part # TRSS175 and then the U-bolt kit part # APUBR-10 and you would have everything you would need.

expert reply by: Jameson C

0

Answer 1

I called Dexter Axle and my contact said that the serial number (D 4526043) can be the same on a couple of different P-11 axle types because it relates to the plant that it was manufactured at. The brake kit and hub and drum assembly that my contact…

view full answer...

Answer 2

With square axles, neither of our over/under kits will be a fit to raise the height of the trailer so another option is to use longer hangers for the leaf springs. You will just want to confirm the hangar height. You may be able to use a hanger like…

view full answer...

Answer 3

The Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 will fit your 2014 Forest River Salem Cruise Lite T262BHXL trailer as long as the axels on your trailer measure 2-3/8" in diameter and if your trailer has double-eye leaf springs…

view full answer...

Answer 4

I called a couple air conditioner manufacturers about your issue. They each said the solution was to build an adapter frame to support the body of the unit higher on the roof. With this in mind you could easily use the Advent #ACM135CH which includes…

view full answer...

Answer 5

Adding a vent to your 2000 Starcraft Venture 1706 Pop Up camper requires a few things. The roof opening has to be at least 14" x 14" and the roof thickness has to be between 2" to 6-1/2" thick. If you are replacing a current vent…

view full answer...

Answer 6

I have a few options for you to help with identifying the axle capacity on your trailer. The first and easiest method is simply by crawling under the trailer and looking for the axle tag on the center of the beam. Depending on age, the axle capacity…

view full answer...

Answer 7

A smaller roof top AC unit like the Advent Air RV Air Conditioners #ACM135C would work great with your 2007 Fleetwood Niagara pop up. This comes with the ceiling vent assembly as well. It is rated at 13,500 Btu.

view full answer...

Answer 8

I appreciate all the information! The part I recommend using is the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. The Sturgi-Stay T-Fitting will connect in-line between one of your…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...