Will EZ Lube Spindle, # TRU37FR Fit The Dexter Trailer Hub Assembly, # 8-201-9UC3-EZ
Question:
Your spindle item # TRU37FR does it FIT hub item # 8-201-9UC3-EZ
asked by: Fred S
0
Expert Reply:
The EZ Lube Spindle, # TRU37FR will fit the Dexter Trailer Hub Assembly - 5200 & 6000 lbs - 6 on 5-1/2 - EZ Lube, # 8-201-9UC3-EZ.
The trailer hub assembly is a 6 on 5-1/2 inch bolt pattern and is rated at 3,000 lbs. per assembly, but because the spindle is rated at 2,600 lbs per spindle the spindle will limit the weight capacity on the axle to 5,200 lbs.
expert reply by:
Jeff D
0
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Kodiak Trailer Brakes K225CP Review
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Video: Kodiak Brake Pads Review and Installation
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - RG04-040 Review
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Trailer Spindle Nut 1"
- Q&A: Availability of Replacement Rotors and Brake Pads for Kodiak Disc Brakes
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Q&A: Does 84 EZ Lube Spindle TRU77FR Come with Castle Nut
- Q&A: Troubleshooting Zerk Fitting on Trailer Axle that Wont Accept Grease
- Q&A: Inner Bearing to Brake Flange Dimension of # 84 Spindle TRU74FR
- Q&A: Replacement # 84 Spindle Recommendation to Replace a Trailer Spindle
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Video: Bearing Repacking and Grease Seals Installation
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Shop: Fifth Wheel Hitch