Fit & Compatibility of Draw-Tite Hitch Cover #63080 on 2016 Outback 2 Hitch

Question

Question:

Will the Draw-Tite Hitch Covers - 63080 on the 2016 Subaru Outback Wagon Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2

asked by: Glenn N

1

Helpful Expert Reply:

I have great news for you!

I was able to go out to our warehouse and test fit the # 63080 Draw-Tite hitch cover onto the Draw-Tite trailer hitch # 75673 for you. Not only did all the parts work great together, I also confirmed that this hitch will fit your 2016 Subaru Outback Wagon.

I have linked the above mentioned products to this page for your purchasing convenience.

expert reply by: Jackie C

1

Answer 1

It sounds like the seals have failed and the grease from the bearings has come out during travel. Also it is possible that if you have an EZ lube axle with a grease zerk at the end to add grease but use a single lip seal, the pressure can blow out…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The best hitch for your 2017 Subaru Outback wagon will be the Draw Tite hitch part #75673 which is a Class III hitch with a 2 inch opening. This hitch size gives you the most flexibility with hitch accessories and the best capacities as well. I like…

view full answer...

Answer 7

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 8

As far as the Draw-Tite - 2" #75673 and the etrailer Hitch - 2" #e98847, these two hitches are almost identical in every way when installed on your 2018 Subaru Outback. They both provide you with 600 pounds of maximum tongue weight capacity…

view full answer...

Answer 9

Torqueing something to 59 ft-lbs shouldn't be too difficult so I'm wondering if the 7/16" bolts that came with your Curt Trailer Hitch Receiver #C67JR weren't seated properly in the frame of your 2022 Subaru Outback Wagon. Try…

view full answer...

Answer 10

For your 2011 Subaru Outback Wagon the best hitch for ground clearance is the Curt #C13410 which fits very tightly to the rear bumper of the vehicle but also doesn't have a crosstube that hangs below the bumper either which helps with ground…

view full answer...

Answer 11

For your 2018 Subaru Outback Wagon the Class III hitch I would recommend is the EcoHitch part #306-X7601 as the overall winner. It has the higher Class III towing capacities, doesn't require the stabilizer strap when carrying a bike rack like the…

view full answer...

Fit & Compatibility of Draw-Tite Hitch Cover #63080 on 2016 Outback 2 Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching