Does Timbren Axle-Less System Include Drive And Passenger Side  

I have a solution for you, but none of the straight axles with a 2,000 lbs capacity that we carry have the 46-5/8 inches spring mount to mount measurement. I recommend that you take a look at the Timbren Axle-Less Trailer Suspension System,…

The Timbren Axle-Less Trailer Suspension w/ Idler Hubs #A20RS545 is made up of two separate suspensions that are each rated for 2,000lbs, which would equal a 2,000lb total capacity.

Since the Loadstar K399 Bias Trailer Tire #AM1HP54 has a load rating "D" and a ply rating of 8, the recommended PSI for the tire is 70.

It would seem that the 1,750 rating that your tire has is the weight rating, but most ST205/75-14 tires with a Load Range of C have a 1,870 lb capacity at 50 psi like part #AM10229. That would mean that when you combine the two tires you have an…

The Timbren Heavy-Duty Axle-Less Trailer Suspension #ASR2KHDS01 will be the only thing we carry to replace your square axle with the dimensions you have. This will replace your axle and leaf springs with a progressive spring and independent…

When selecting the correct replacement axle for a utility trailer you will need to know both the hub face (wheel center) and spring center measurements. For example, if your current hub face measurement is 88" and you replace this with an axle…

Technically yes, if you were replacing idler hubs, as long as the inner/outer bearing, grease seal AND wheel bolt pattern match, there's nothing that prevents you from using a 3,500 lb axle hub, like #84545BX on a 2,000 lb axle. If the bearings…

When you replace the axles on a trailer you will look at the (A) hub-face-to-hub-face and the (B) spring-center-to-spring-center measurements and choose an axle that has the same measurements that your current axle does. Since you are wanting to add…

The Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs #20545I-EZ-60-15 is a great starting point to upgrade your trailer. This will give you a standard size axle with good bearings, hubs, and EZ-lube…