Wire Rope Length and Cover Recommendation for Bulldog Winch BDW10039

Question

Question:

What is the wire rope length of this winch and is there a cover available for this winch. Im thinking about one for mounting on my gooseneck trailer. Thanks much!!!

asked by: Chris H

1

Helpful Expert Reply:

I checked with Bulldog Winch and they informed me that the Bulldog Winch Trailer Winch # BDW10039 that you referenced has a 100 foot long rope that is 9 mm in diameter.

For a cover then you would want the part # BDW20046.

expert reply by: Jameson C

1

Answer 1

The winch cover you need for the Bulldog Winch Trailer Winch #BDW10029 that you have is the Bulldog Winch Winch Cover #BDW20046 which is the correct size and will do a great job protecting the winch from the elements.

view full answer...

Answer 2

The Bulldog Winch Trailer Winch #BDW10039 is 24" long x 7-1/4" wide x 7-1/4" tall so it will have no issues fitting on your recessed plate on your trailer. The winch includes a mounting plate that is 20" long and 7-3/8" wide.…

view full answer...

Answer 3

I have a solution for you to connect the Bulldog Winch Trailer Winch #BDW10039 to your vehicle's battery, but it will not work well for you to connect the winch to the vehicle's 7-way connector. The highest gauge wire a 7-Way connector is…

view full answer...

Answer 4

You will need to lock out the sliding function on your Pull Right 5th wheel hitch to use the Ram Gooseneck to 5th Wheel Trailer Coupler Adapter item #KPG5-R30IP. If you can not lock out your slider than I recommend the Curt Spyder Gooseneck Trailer…

view full answer...

Answer 5

The Superwinch Winch 2 Go 4000 SR #SW1140232 includes a mounting plate that bolts to the bottom of the winch's main housing. This yellow steel plate itself has four exposed mounting holes to allow it to be secured to a stationary surface. The…

view full answer...

Answer 6

The Superwinch Tiger Shark Off-Road Winch #W85NF that you referenced does not require installing an additional fuse as it has one built into it.

view full answer...

Answer 7

There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to #PK11720. And RV style 7-way uses blades, like #PK12706. We do not offer any pre-made adapters to make this…

view full answer...

Answer 8

Check and clean the connectors of the 7-way on your vehicle. Typically when a brake controller like the P3 Brake Controller part #90195 doesn't want to go into sleep mode it is because the controller is falsely detecting a trailer due to…

view full answer...