Roof Rack Recommendation for a Truck Camper Shell on a 2016 Toyota Tacoma

Question

Question:

I want a complete system to go on the back of a ARE 2016 Tacoma limited camper shell 5foot bed. Wanted black with the chome bars. Is it compatible? Thanks

asked by: John

1

Helpful Expert Reply:

For a roof rack confirmed as a fit for your 2016 Toyota Tacoma for install on the top of the camper shell we have the TracRac Rack part number # TH29200XT which is a confirmed fit.

I attached an install video for this rack on a different truck for you to check out as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 #RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long…

view full answer...

Answer 2

The Thule AeroBlade crossbars will not fit the Rhino-Rack RLTP legs, #RLTP. These legs are designed for Rhino-Rack heavy duty square bars. Also, different vehicles take different length bars so there is no guarantee that the length of the AeroBlade…

view full answer...

Answer 3

We had the Rhino-Rack Track Mount RLTP Legs, #RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima…

view full answer...

Answer 4

The Rhino-Rack RLCP Leg Kit for OEM Fixed Mounting Points - Pad Mount - Qty 6 RLCP02 are not compatible with the Yakima Track System, however, I do have a fit. The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks -…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 9

Thanks for reaching out, Jeff! While I'm not familiar with adding an OEM-style brake controller to a Ford pickup, since your 2019 F-150 didn't initially come with the factory tow package my instinct is to have you check fuse 24 for your brake…

view full answer...

Answer 10

You can install a 7 way connector on your 2019 Ford F-150 by using the Curt T-Connector #C56413, which will plug into the factory supplied 4 way connector plug on your vehicle and give you a fully functioning 7 way connector. If you've got a…

view full answer...

Answer 11

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 12

For suspension enhancement on your 2022 Ford F-150, I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS3611-YHD. The RoadActive leaf spring enhancement is a better choice than air bags because the leaf spring…

view full answer...