Timbren Rear Suspension Enhancement System Recommendation for 2015 Ford F-150 Stock Height

Question

Question:

IO assume my 2015 Ford F150 has the standard stock lift - how would I know if it is or the 4inch lift? I have a Ford F150 4x4 4 door quad cab, 5 ft 7in box, platinum edition - I am looking for the correct fit thanks

asked by: Mike

0

Expert Reply:

Thanks for the picture of your truck! Looks very clean! I can tell by the picture that you do not have a 4 inch lift and that you have the standard suspension height.

That means that you would need the part # TFRTT1502D which would give you additional suspension support.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The RAS systems are the best options for suspension support. They give you adjustable suspension support that's easier to install, less maintenance, and unlike other options actually improves ride quality instead of diminishing it. So for your…

view full answer...

Answer 2

I reached out to my contact at Lippert and she mentioned there would be no issues using the Road Armor Shock Absorbing Equalizers #LC696740 on a trailer used as much as yours, and that since adding them would relieve stress on your axles and other…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…

view full answer...

Answer 5

From our experiences the Harbor Freight trailers like yours have a hub bore that requires a cap or Bearing Buddy that measures 2.047 inches like the #BB2047 you referenced. We don't have a standard cap that fits this size so the Bearing Buddy is…

view full answer...

Answer 6

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 7

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 8

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 9

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 10

I can definitely help you find the correct replacement hub and bearings for your Dexter P-12 SLR axle, but since part of the serial number was unreadable you will need to take a few simple steps to identify which bearings your axle uses. The easiest…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

Unfortunately we do not have a way to replace the keys without knowing the key number for the lock. If they happened to have written down the key number from the lock then we will be able to get you a replacement. The etrailer Trailer Hitch Receiver…

view full answer...

Timbren Rear Suspension Enhancement System Recommendation for 2015 Ford F-150 Stock Height

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching