Lock Cylinder Recommendation for Threaded Hitch Pin of a Yakima DoubleDown Bike Rack

Question

Question:

Will this locking mechanism work with the Yakima DoubleDown 4 Bike Hitch Mounted Folding Rack for 1-1/4inch and 2?

asked by: David A

0

Expert Reply:

Yes, the Yakima HitchLock for Yakima Hitch Mounted Bike Racks # Y07235 is a confirmed lock cylinder for your Yakima DoubleDown 4 Bike Rack that you referenced.

expert reply by: Jameson C

0

Answer 1

Because the Yakima RocketBox Pro 14, #Y07192, is a relatively short box, 74 inches long, it is likely it will fit your 2013 Subaru XV Crosstrek without hatch interference. But to be absolutely sure there is one measurement you will need to take.…

view full answer...

Answer 2

Yes, the Yakima HitchLock part #Y07235 if a fit for all Yakima bike racks so it would fit and work well on yours. I attached a review video for this product for you to check out as well.

view full answer...

Answer 3

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Answer 4

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're…

view full answer...

Answer 5

The part number 072-097-00 is for a Dexter leaf spring. Our closest equivalent would be the 5-Leaf Double-Eye Spring item #e34SR. This is a 3,000 lbs spring that works with 6,000 lbs axles. It measures 25-1/4" long from eye hole to eye…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 8

To install a 7-Way harness on your 2023 Ford Bronco without the towing package, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt…

view full answer...

Answer 9

I would be happy to help! Since your 2018 Keystone Cougar 311 RES 5th wheel with tandem 5200lb Dexter axles has the Dexter 072-097-00 leaf springs currently installed the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long…

view full answer...

Answer 10

There are 2 different capacities independent of each other though related. Tongue weight is the downward force or weight on the trailer hitch. So it is pushing down at the back of the vehicle. The gross trailer weight is the weight of whatever it…

view full answer...

Answer 11

In order to install the Redarc Tow-Pro Elite Brake Controller part #RED63RR on a 2022 Ford Bronco you'll first need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part #22292 which will make for a plug and play install up…

view full answer...

Answer 12

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350…

view full answer...

Lock Cylinder Recommendation for Threaded Hitch Pin of a Yakima DoubleDown Bike Rack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching