How Many Mounts Come with the DeeZee Replacement Part

Question

Question:

Does the kit come in a pair of 2???

asked by: Robert

0

Expert Reply:

Yes, the part # DZ97904 that you referenced includes two mounts like what you see in the product picture..

expert reply by: Jameson C

0

Answer 1

The Curt Pintle Hook #C48231 is indeed rated for 60K GTW and 12K vertical load. I confirmed these specs with Curt. Those are high weight ratings but keep in mind that the nature of a pintle hook, which has a large amount of flat steel surface area…

view full answer...

Answer 2

I would go with the Adjustable Lunette Ring by Tow Ready part #63036. This comes with an adjustable channel to allow you to adjust the height of the ring so that your trailer gets towed level.

view full answer...

Answer 3

The highest weight rated pintle hitch mount I have that will fit in a 2 inch hitch receiver is the Convert-A-Ball, part #PH2. rated for up to 16,000 pounds. Curt pintle hitch #C48231 does not fit a 2 inch receiver.

view full answer...

Answer 4

A longer ball mount would be a decent idea I would think but since its going to be a Class II 1-1/4 inch ball there aren't super long options. Mostly everything will be about same length with some variations. If you can determine the…

view full answer...

Answer 5

Following the yardstick testing method I have depicted below you would need to have at least a 10" measurement in order for the Race Ramps Rally Ramps for Service and Display #RR-30 to be a compatible fit. Your tires would also need to be…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 8

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

How Many Mounts Come with the DeeZee Replacement Part

Product Page this Question was Asked From

Continue Researching